For safe operation, Before Using the Product

NS3526

5. For safe operation

Before using this product, please read this Operator's Manual thoroughly to ensure correct operation. The fol- lowing are precautions that should be observed in order to use the product smoothly. Elsewhere in the Manual, the warning mark is used to bring your attention to these precautions.

BEFORE USING THE PRODUCT

•This product has been designed mainly for the pur- pose of spraying pest control chemicals and weedkillers. Please do not use it for any other pur- pose, as this may cause unforeseen accidents.

•Since this product uses agricultural chemicals that require careful operation, misuse can be dangerous. Do not use this product when tired or otherwise in poor physical condition, or when you may be unable to judge correctly or operate accurately, such as after taking cold relief medicines or drinking alcohol. Also, children or persons who are unable to understand the contents of this Manual should under no circum- stances be permitted to use the product.

•The engine exhaust gas contains toxic carbon mon- oxide. Please do not use the product indoors, in vinyl houses or tunnels, or in other poorly ventilated places.

• Do not use this product in the following cases.

1.When the product could fall over or in other situations when it is difficult to hold or operate.

2.After sunset or at other times when eyesight is poor and the safety of the spraying area is difficult to as- certain.

3.In worsening weather (rain, fog, strong wind, lightning,

etc.)

•When using for the first time, before commencing actual spraying please receive guidance in operat- ing the product from a person with adequate experi- ence.

•Fatigue reduces powers of concentration and in- creases the risk

of accidents. When planning work, please allow ample time,

setting a limit of 30-40 minutes for single spraying sessions and breaks of 10-20 minutes in between. Also, do not spray for more than 2 hours in any one day.

•Please take good care of this Operator's Manual and refer to it for additional information from time to time.

•When selling or lending this product, it should be ac- companied by this Operator's Manual.

WARNING

•Check to see if the shock-absorbing rubber mount has become cracked or otherwise damaged. Note that failing to replace this rubber mount when it has become cracked or damaged may cause the engine to come loose from its frame during use, thus result- ing in possible serious bodily injury.

•If cracked, be sure to replace without delay.

WARNING

1.If you don’t observe the working time, or working manner, Repetitive Stress Injury (RSI) could occur. If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doctor before getting worse.

2.To avoid noise complaints, in general, operate prod- uct between 8 a.m. and 5 p.m. on weekdays and 9 a.m. to 5 p.m. on weekends.

GB-4

NS3526 specifications

The Zenoah NS3526 is a high-performance engine that stands out in the realm of small engines, particularly for applications requiring power and reliability. Known for its robust design and efficiency, the NS3526 is widely used in various fields, from professional landscaping to consumer gardening tools.

One of the defining features of the NS3526 is its displacement of 35.2 cc, which strikes an ideal balance between power output and size. This engine is specifically engineered for high torque, allowing it to manage tough tasks without compromising on performance. With its lightweight construction, the NS3526 enhances maneuverability and reduces user fatigue during extended periods of operation.

The engine integrates advanced technologies to improve its efficiency and user-friendliness. One notable feature is the electronically controlled ignition system, which ensures reliable starting and consistent performance under varying load conditions. This technology reduces maintenance needs and enhances fuel economy, making the NS3526 a cost-effective choice for users.

Its engine design incorporates a two-stroke cycle, which effectively delivers high power while minimizing weight. This is particularly beneficial for handheld equipment and other applications where portability is a primary concern. The NS3526's ability to deliver impressive power in a compact form makes it ideal for use in chainsaws, trimmers, and blowers.

Another characteristic of the Zenoah NS3526 is its high-quality materials. Built to withstand harsh environments, the engine features durable components that enhance longevity and operational stability. Its anti-vibration system minimizes user fatigue, facilitating comfortable operation even during prolonged use.

The NS3526 is not only about raw power but also about adaptability. It is compatible with a range of attachments, which allows users to customize their equipment according to their specific needs. Whether cutting, trimming, or blowing leaves, the versatility of the Zenoah NS3526 makes it a valuable asset for professionals and hobbyists alike.

In conclusion, the Zenoah NS3526 sets a high standard in the small engine market with its combination of power, efficiency, and durability. Its innovative technologies and thoughtful design make it a trusted choice for those who demand reliability in their outdoor equipment. Whether you are a professional landscaper or a homeowner tending to your yard, the NS3526 delivers the performance you can rely on.