Zenoah NS3526 owner manual Chemical filling, Operation

Page 9

NS3526

8. Chemical filling

WARNING

 

■

Procedure for filling

 

 

1.

Use a bucket or other suitable container and dilute

• Chemical substances should be handled correctly,

 

the chemical to the requisite strength.

observing the precautions marked on the container.

2.

Place the sprayer on an even and stable surface and

Some chemicals are extremely hazardous to humans

 

remove the chemical tank cap.

and animals, and handling errors can cause serious

3.

Fill the tank by passing chemical through the strainer.

poisoning or even fatal accidents.

4.

When filling is complete, firmly tighten the cap.

•When not in use, chemical substance containers should be stored separately from other containers out of the reach of children.

IMPORTANT

• Do not fill the chemical tank with undiluted fluid. This could cause the gasket and valves to lose their dura-

G

B

bility.

a. strainer

Chemical tank capacity: 25 litres

9. Operation

WARNING

•Highly combustible. When refueling, switch the en- gine off and keep well away from naked flames.

•After filling the tank with fuel, firmly tighten the cap.

•Make sure that the gear oil is filled until the middle of the check-window. If it is not enough, loose the upper bolt and fill the gear oil. (SAE40CC)

(1)

(1) bolt

 

(2)

(2) window

(3) drain bolt

 

a

a. cap

b. fuel tank

b

(3)

1. Press the primer at the bottom of the carburetor a few

times with your finger until the fuel starts to flow through

the transparent pipe.

a. air cleaner

b. choke lever

■Starting engine

WARNING

•Before starting the engine, make sure that the spray lever (spray valve) is completely returned. Starting with the spray lever still pulled out is dangerous, as chemi- cal fluid may spray out of the nozzle as soon as the engine is started.

•To start the engine, place the sprayer on an even and stable surface or platform. If the sprayer is unstable, the reaction on starting etc. may cause it to fall.

c.

close

d.

open

e.

transparent pipe

f.

primer

NOTE

•There is no need to operate the primer when restart- ing immediately after stopping the engine, provided there is fuel left in the fuel tank.

2.Lift the choke lever on the right of the air cleaner until it is in the "closed" position, then open the throttle le- ver on the main unit side about 1/3-1/2 from the "slow" position.

IMPORTANT

•Do not allow the chemical fluid or water in the tank to run out while the engine is running. If the engine runs empty it may cause breakage of the spray pump.

g.throttle lever

h.fast

i.slow

GB-9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents NS3526 Parts location ContentsPurpose SpecificationFor safe operation Before Using the ProductPrecautions When Transporting CHEMI- Cals Precautions Before SprayingPrecautions When Transporting the Sprayer Precautions Concerning FuelOther Precautions Precautions After SprayingMaintenance Precautions Maintenance of LabelsSet the pressure regulating dial as follows Set upFuel Operation Chemical fillingCleaning after completion of spraying Spraying procedureStopping engine SprayingAir cleaner MaintenanceFuel filter Spark plugMuffler Procedures to be Performed After Every 100 Hours of USEDisposal StorageIntake AIR Cooling Vent OILTroubleshooting guide Limited warrantyCheck Probable Causes Action

NS3526 specifications

The Zenoah NS3526 is a high-performance engine that stands out in the realm of small engines, particularly for applications requiring power and reliability. Known for its robust design and efficiency, the NS3526 is widely used in various fields, from professional landscaping to consumer gardening tools.

One of the defining features of the NS3526 is its displacement of 35.2 cc, which strikes an ideal balance between power output and size. This engine is specifically engineered for high torque, allowing it to manage tough tasks without compromising on performance. With its lightweight construction, the NS3526 enhances maneuverability and reduces user fatigue during extended periods of operation.

The engine integrates advanced technologies to improve its efficiency and user-friendliness. One notable feature is the electronically controlled ignition system, which ensures reliable starting and consistent performance under varying load conditions. This technology reduces maintenance needs and enhances fuel economy, making the NS3526 a cost-effective choice for users.

Its engine design incorporates a two-stroke cycle, which effectively delivers high power while minimizing weight. This is particularly beneficial for handheld equipment and other applications where portability is a primary concern. The NS3526's ability to deliver impressive power in a compact form makes it ideal for use in chainsaws, trimmers, and blowers.

Another characteristic of the Zenoah NS3526 is its high-quality materials. Built to withstand harsh environments, the engine features durable components that enhance longevity and operational stability. Its anti-vibration system minimizes user fatigue, facilitating comfortable operation even during prolonged use.

The NS3526 is not only about raw power but also about adaptability. It is compatible with a range of attachments, which allows users to customize their equipment according to their specific needs. Whether cutting, trimming, or blowing leaves, the versatility of the Zenoah NS3526 makes it a valuable asset for professionals and hobbyists alike.

In conclusion, the Zenoah NS3526 sets a high standard in the small engine market with its combination of power, efficiency, and durability. Its innovative technologies and thoughtful design make it a trusted choice for those who demand reliability in their outdoor equipment. Whether you are a professional landscaper or a homeowner tending to your yard, the NS3526 delivers the performance you can rely on.
Top Page Image Contents