hussman VGM operation manual Glass Replacement & Right Left Adjustment

VGM, VGD-0505

Maintenance (cont.)

2.Increase the height to 12", and raise and lower the glass 6 more times.

3.Finally, raise the glass to it's full extension.This should release any settled lubricant in the cylinders, and prevent any stress on the front glass. (1)(3)

GLASS REPLACEMENT & RIGHT – LEFT ADJUSTMENT

1. Open glass	2. Back out
panel.	all the set screws
Relieve the	along the top
tension on	edge of the glass
the hinge.	panel
	(3mm set screw)

PVC

U-channel

Back

of Case

Inside

of Case

3.Use tip of screwdriver to gently tap loose wedge the entire length of the panel

4.Slide glass panel in desired direction or remove panel

FOR PROMPT SERVICE

When Contacting the Factory regarding problems, Be sure to have the Case MODEL and SERIAL NUMBER Handy.

This Information is on a plate located on the case itself.

1 2