RedMax EDG2300 manual Stopping Engine, Boring operation, Adjustment of Idling Speed

Page 12

Operation

Stopping Engine

Release the throttle lever and press on the red button until the engine comes to a complete stop.

Stop button

Boring operation

Keep the engine running at full throttle during operation.

Keep the drill going straight. Tilted boring can cause the drill to bend.

Avoid touching the spark plug lead during operation.

Adjustment of Idling Speed

The engine idling speed is preadjusted at the factory so that the engine keeps running without moving the drill when releasing the throttle lever to the idling position. However, due to changes in engine conditions, it may be necessary to adjust the idling.

To increase idling, screw idle adjustment screw in, until preferred speed is obtained. To decrease idling, unscrew idle adjustment screw until preferred speed is obtained.

Idle adjustment screw

12

Image 12
Contents EDG2300 6325-93110Safety First Contents Safety Precautions  4 Work gear and clothing Things to check before using your portable gas drill Avoid Noise ProblemThings to check before starting up the engine  7   8  Parts Location & Specifications SetupModel EDG2300 HOW to MIX Fuel FuelRecommended Mixing Ratio Gasoline 32OIL Fueling the UnitThrottle Cable Adjustment OperationStarting Engine Adjustment of Idling Speed Stopping EngineBoring operation Maintenance Replacement plug Champion RCJ-6Y Inspection every 100 hoursInspection every 25 hours Storage Before Long-term StorageParts List Parts List EDG2300 EDG2300  18   19  Model EDG2300 Year Limited Warranty There are no other express warrantiesIl nexiste aucune autre garantie explicite EPA PH1 Emission Control LabelKomatsu Zenoah America INC