9 Press

.

[ANTI JUNK #]

STOP

10 Press to exit.

Setting the Reception Mode

The machine has three modes for receiving incoming faxes:

AUTO mode:

The machine automatically answers all calls on 4 rings and begins fax reception.

MANUAL mode:

All calls, including faxes, must be answered by picking up the

machine's handset or an extension phone connected to the same line.

TEL/FAX mode:

The machine automatically answers all calls on 2 rings. If the machine detects that a call is a voice call (including a manually dialed fax), it makes a special ringing sound to alert you to answer. If the machine detects that the call is an automatically dialed fax, it begins reception automatically.

To set the reception mode, make sure a document is not loaded in the

document feeder, and then press

RESOLUTION/

RECEPTION MODE

until the desired mode

appears in the display.

For more information on receiving faxes, see Chapter 4.

Setting the Reception Mode

Volume Adjustment

Speaker volume

SPEAKER

1 Press .

2Press or to select

HIGH, MIDDLE, or LOW.

SPEAKER

Press again to turn off the speaker.

Handset receiver volume

1When talking through the handset,

press or to select HIGH,

MIDDLE, or LOW.

Note: The volume reverts to MIDDLE each time you replace the handset.

Ringer volume

1Press or to select

HIGH, MIDDLE, LOW, or OFF.

SPEAKER

(Make sure has not been

pressed, the handset is not lifted, and a document is not loaded in the feeder.)

The ringer will ring once at the selected level.

2If you selected “OFF OK ?” to turn

off the ringer, press .

1. Installation

13

Page 15
Image 15
Sharp UX-B800SE operation manual Setting the Reception Mode, Volume Adjustment