programmed. Clear one of the keys and then store a group.

4Press the Group Key that you want

33/G1 34/G2

to use ( or ). (If you are

clearing a Group Key, press the Group key that you want to clear and go to Step 8.)

If [ALREADY STORED] or [RAPID # STORED] appears, the key has already been programmed. Clear the key or try the other Group Key.

5Select a destination using one of the following methods:

Press a Rapid Key.

Press SPEED DIAL and enter a 2-digit Speed Dial number.

Press or until the desired destination appears in the display.

Press , , or

(only for an e-mail destination).

6Press to enter the destination.

7Repeat Steps 5 and 6 for each of the other desired destinations (maximum of 20).

You can press to scroll through and check your entered destinations.

To delete a destination, press when it appears.

Caller ID (Requires Service)

8When you have finished entering

the destinations, press .

STOP

9 Press to exit.

Caller ID (Requires Service)

Important: To use this function, you must subscribe to a Caller ID service from your phone company. The machine may not be compatible with some Caller ID services.

If you subscribe to a Caller ID service, you can have the machine show the name and number of the caller when you receive a call.

1

Press

FUNCTION

until

 

, then

 

 

[OPTION SETTING] appears.

 

2

Press

, then

until

 

 

[CALLER-ID] appears.

Special6.

Functions

3

Press

 

(YES) to turn on Caller

 

ID. (To turn off Caller ID, press and go to Step 7.)

4 If the area code must not be included when you dial a local phone number (within your area

code), press to select SET and enter your area code in Step 5. (This will remove the area code from local numbers stored in the Caller ID list, allowing you to automatically dial those numbers from the list (see

37

Page 39
Image 39
Sharp UX-B800SE Caller ID Requires Service, To delete a destination, press when it appears, Until Then, Press Then Until