Caller ID (Requires Service)

Caller ID list on this page).)

If you do not need to have the area code removed from local numbers

in the Caller ID list, press and go to Step 7.

5Enter the 3 digits of your area code.

6Press .

STOP

7 Press to exit.

Note: Some caller ID services may not provide the name of the caller. In this case, only the phone number will appear when you receive a call.

Display messages

One of the following messages will appear while the machine rings if caller information is not available.

NO

No caller information was

SERVICE

received. Make sure that

 

your service has been

 

activated.

Caller ID list

The machine keeps a log of the most recent 30 calls and faxes you have received (the Caller ID list). You can view the list and automatically dial a number from the list.

The list is only available if you have Caller ID service and have turned on the Caller ID function.

After you have received 30 calls, each new call will delete the oldest call.

The Caller ID list can also be printed. See page 50.

1Press until [<REVIEW CALLS>] appears.

2Press or to scroll through the list.

STOP

To exit the list, press .

3 To dial a number, display the

CALLER-ID ERROR

OUT OF

AREA

Noise on the telephone line prevented reception of caller information.

The call was made from an area which does not have Caller ID service, or the service is not compatible with your service.

number and:

Fax: Load the document and press

. Transmission will begin.

Voice call: Pick up the handset. Dialing will begin automatically.

PRIVATE

Caller information was not

CALL

provided at the caller’s

 

request.

Deleting calls from the list

To delete a single call from the list,

display the call and press .

38

Page 40
Image 40
Sharp UX-B800SE operation manual Display messages, Caller ID list, Deleting calls from the list, Number