Sharp UX-B800SE operation manual Mail settings, Setting Description, Initial setting Tiff

E-mail Settings

E-mail settings

Enter the required information for each setting as explained below. This is done in step 4 of the procedure on the previous page.

♦The sender address and SMTP server settings are required. The other settings are optional.

♦Use the letter keys to enter text. For information on using the letter keys, see page 6.

♦The e-mail subject, e-mail message, and file format that you enter below are default settings. They will be used if you do not specify these items at the time of transmission.

Setting	Description
SENDER	Enter the sender name that will appear in the e-mail message
NAME
	(max. of 50 characters). When finished, press				.
SENDER	Enter your sender e-mail address (max. of 128 characters). When
ADDRESS
	finished, press		. (Note: Be sure to enter your actual e-mail
	address. Return e-mail and undelivered mail reports will be sent to
	this address. In addition, some SMTP servers reject outgoing e-
	mail if a valid sender e-mail address is not entered.)
E-MAIL	Enter a default subject (max. of 128 characters). When finished,
SUBJECT
	press	.
E-MAIL	Enter a default message (max. of 256 characters). When finished,
MESSAGE
	press	.
FILE FORMAT	This sets the default format of the file that is created when you
	scan a document. Press			for TIFF or	for PDF.
	Initial setting: TIFF
SMTP SERVER	Enter the host name or IP address of your outgoing (SMTP) mail
	server (max. of 60 characters). When finished, press					.

18