Blocking Unwanted Faxes
Blocking Unwanted Faxes
The Anti Junk Fax function blocks reception of faxes from a fax number that you specify.
To use this function, enter the fax number that you want to block. Only one number can be entered.
FUNCTION
1Press , then until [ENTRY MODE] appears.
2Press , then until [ANTI JUNK #] appears.
3Press (SET) to store an Anti Junk number.
(To clear a previously stored
number, press (CLEAR) and go to Step 5.)
4Enter the number with the number keys (max. 20 digits).
5Press .
STOP
6 Press to exit.
♦When a fax is blocked (or when a voice call is blocked if you are using the Caller ID function), a transaction report (page 51) will print to inform you (unless “TRANSACTION LIST” on page 46 is set to “NEVER PRINT”).
Duplex Scanning
Duplex Scanning is convenient for transmitting or copying
♦Note that any blank sides must be included when scanning the pages (if the number of pages is not equal each time the machine scans the stack, an error will result).
1Load the documents. Make sure the pages are placed
• | RESOLUTION/ |
|
If desired, press RECEPTION MODE | to set the | |
| resolution and/or contrast. |
|
2 | Press DUPLEX and then | . |
3Perform all steps of the desired copy or transmission operation.
4When all pages of the document have been scanned, turn the stack over (do not change the page order) and load the stack again.
5Press .
40