Sharp UX-B800SE operation manual Batch Page Numbering, Sending a Fax From Memory

Batch Page Numbering

Use this feature to add a slash and the total number of pages to each page number on transmitted fax pages (for example, "P. 1/5", "P.2/5", etc.). This allows the recipient to check for missing pages.

1Load the document(s).

FUNCTION

2Press , then to show [PAGE COUNTER].

3Press .

Display: [ENTER # (01 - 99)]

4Enter the total number of pages (“01” to “99”) with the numeric keys.

Example: 5 pages .

RESOLUTION/

5If desired, press RECEPTION MODE to set the resolution and/or contrast.

6Dial the receiving machine and send the fax.

•To cancel a batch number entry, remove the document from the

STOP

feeder or press .

•If the number of pages actually transmitted is not the same as the batch number entered, an alarm will sound and [PAGE COUNT ERROR] will appear in the display. “PAGE E.” will also appear in the NOTE column of the Transaction Report if printed.

Batch Page Numbering

Sending a Fax From Memory

To increase transmission speed, you can send a fax through the machine’s memory. After transmission, the fax is automatically cleared from memory.

Note: If a power failure occurs while
sending a fax from memory, you must
repeat the operation.		Sending Faxes
To send a fax through memory, load the
document, press	, and dial using	3.

one of the methods below. (Note that an e-mail destination cannot be selected.)

♦Press a Rapid Key.

♦Press SPEED DIAL , enter a 2-digit Speed

Dial number, and press .

♦Enter the fax number with the number

keys and press .

♦ Press repeatedly to select an

auto-dial number and press .

♦ Press once to select the last

number dialed and press .

If [MEMORY FULL] appears, see If the memory becomes full on page 36.

31