Sharp UX-B800SE operation manual Sending Faxes, Transmittable Documents, Loading the Document

Transmittable Documents

3. Sending Faxes

Transmittable Documents

Minimum document size/weight

Loading up to 20 sheets at once:

5.8” x 5.5” (148 x 140 mm) 14 lbs. (52 g/m2)

Loading 1 sheet at a time:

2.8” x 5.5” (70 x 140 mm) 14 lbs. (52 g/m2)

Maximum document size/weight

Loading up to 20 sheets at once:

Letter (8.5” x 11”, 216 x 279 mm) 20 lbs. (75 g/m2)

Loading up to 5 sheets at once:

Legal (8.5” x 14”, 216 x 356 mm) 20 lbs. (75 g/m2)

Loading 1 sheet at a time:

Legal (8.5” x 14”, 216 x 356 mm) 42 lbs. (157 g/m2)

The maximum scanning width is 8.2” (208 mm), and the top and bottom 0.16” (4 mm) of a document cannot be scanned.

Other restrictions

♦The scanner cannot recognize yellow, greenish yellow, or light blue ink.

♦Remove all clips, staples, and pins before loading documents in the feeder (these will damage the machine).

♦Ink, glue, or correcting fluid on a document must be dry before scanning.

♦Documents which are taped, torn, smaller than the minimum size, carbon backed, easily smudged, or have a slick, coated surface should be photocopied, and the copy loaded in the feeder.

♦Documents that are curled or have a wave-like pattern must be flattened.

Loading the Document

Up to 20 letter-size sheets (5 legal-size sheets) can be placed in the feeder at once. (If the sheets do not feed or double feeds occur, reduce the number of sheets.) The sheets will feed automatically starting from the bottom sheet.

♦To send or copy more than the maximum number of sheets, place the additional sheets gently in the feeder just before the last sheet is scanned. Do not force the sheets in, as this may cause double-feeding or jamming.

♦For large or thick sheets that must be loaded one at a time, insert each sheet into the feeder as the previous sheet is being scanned. Insert gently to avoid double-feeding.

1Flip up the feeder cover (➊) and adjust the document guides to the width of your document (➋).

2

1

24