RedMax EDG2300 manual Before Long-term Storage

Page 14

Storage

Before Long-term Storage

Drain fuel tank and run engine out until all fuel in the carburetor is used up.

Remove the spark plug and drop a spoonful 2 cycle oil into the cylinder. Crank the engine several times and replace the plug.

Pull starter until compression is felt.

Brush off dirt from the drill surface and apply rust protective oil.

Store the machine in a dry, dust-free place.

14

Image 14
Contents EDG2300 6325-93110Safety First Contents Safety Precautions  4 Work gear and clothing Things to check before starting up the engine Things to check before using your portable gas drillAvoid Noise Problem  7   8  Model EDG2300 Parts Location & SpecificationsSetup Recommended Mixing Ratio Gasoline 32OIL HOW to MIX FuelFuel Fueling the UnitStarting Engine Throttle Cable AdjustmentOperation Boring operation Adjustment of Idling SpeedStopping Engine Inspection every 25 hours MaintenanceReplacement plug Champion RCJ-6Y Inspection every 100 hours Storage Before Long-term StorageParts List Parts List EDG2300 EDG2300  18   19  Model EDG2300 Year Limited Warranty There are no other express warrantiesIl nexiste aucune autre garantie explicite EPA PH1 Emission Control LabelKomatsu Zenoah America INC