1. Safety Precautions
■Things to check before using your power auger
•Before beginning work, look around carefully to get a feel for the shape of the land, and whether or not there are any obstacles which might get in the way while working, and remove any obstacles which can be cleared away before beginning work.
•The area within a perimeter of 45 feet of the person using the power auger should be considered a hazardous area into which no one should enter while the power auger is in use, and when necessary yellow warning rope, warning signs, or some other form of warnings should be placed around the perimeter of the area. When work is to be performed simultaneously by two or more persons, care should also be taken to constantly look around or otherwise check for the presence and locations of other people using power auger within the work area so as to maintain a distance between each person sufficient to ensure safety.
•Before beginning work, each component of the power auger should be checked to make sure that it is in proper working order and to make sure that there are no loose screws or bolts, fuel leaks, ruptures, dents, or any other problems which might interfere with safe operation. Be especially careful at this time to check that there is nothing wrong with the drills or with the joints by which the drills are attached to the power auger.
6
■Things to check before starting up the engine
•Take a careful look around to make sure that no obstacles exist within a perimeter of 15 feet or less around the power auger before starting the engine.
•The power auger is equipped with a centrifugal clutch mechanism which causes the drills to begin to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, hold it firmly in place so as to ensure that nor the throttle may not come into contact with any obstacles when the engine starts up.
•Never place the throttle into the high speed position when starting the engine.
•After starting up the engine, check to make sure that the drills stop rotating when the throttle is moved fully back to its original position. If the drills continue to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized Red Max servicing dealer for repair.
■Avoid noise problem
NOTE
Check and follow the local regulations as to sound level and hours of operations for power auger.
•In general, operate power auger between 8a.m.and 5p.m.on week days and 9a.m.to 5p.m.weekends. Avoid using power auger late at night and/or early in the morning.