RedMax AG4300 manual Things to be careful about when using your power auger

Page 7

1. Safety Precautions

Things to be careful about when using your power auger

When using your power auger, grip the handles of the power auger firmly with both hands, place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

Maintain the speed of the engine at the level required to perform drilling work, and never raise the speed of the engine above the level necessary.

Always be sure never to allow other persons to come within the work area while drilling.

Be especially careful not to slip if it is raining or if rain has just stopped, as the ground is likely to be slippery at such times.

If the grass or other object gets caught in the drill during operation, always be sure to turn off the engine before removing the object.

Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Establish a safe method for gaining your attention during operation. Be careful if you are approached.

If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

Keep operation area clear of all persons, particularly small children and pets.

Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an electrical shock.

Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine. These metallic parts reach high temperatures during operation and doing so could result in serious burns.

When you finish drilling in one location and wish to continue work in another spot, turn off the engine before carrying it to the new location.

Never transport the power auger over rough roads over long distances without first removing all fuel from the fuel tank, as doing so might cause fuel to leak from the tank as a result of shocks absorbed during transport.

7

Image 7
Contents T4507-93110 AG4300Safety First Contents  4  Safety PrecautionsWork gear and clothing  6  Things to check before using your power augerThings to check before starting up the engine Things to be careful about when using your power auger  8  Recommended Mixing Ratio Gasoline 50OIL When using Zenoah genuine oilHOW to MIX Fuel FuelFor Your Engine LIFE, Avoid Fueling the Unit 10   11  OperationDrilling F9 Engine switch 12  Stopping EngineF10 F11 F12 Adjusting Carburetor F10,11,12Needle 13⁄8 ± 1⁄4 L needle 11⁄4 ± 1⁄4  14  MaintenanceClutch Cylinder Fins F16Spark Arrester F17 Gear BOXAG4300 SpecificationsStorage Before Long-term Storage 17  Parts list 18  Engine Unit AG4300 S/N 100101 and upDescription Part Number Qty  19  20  Drill and Accessory Group AG4300 S/N 100101 and upPart Number Description Qty  21 Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC