Earlex hv5500 Safety Operating Instructions, Important Electrical Information, Parts List

Page 5

L1325_5500_0311.qxd:Layout 2 7/3/11 17:00 Page 5

SAFETY OPERATING INSTRUCTIONS

WARNING! FIRE AND EXPLOSION HAZARD

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY,DO NOT EXPOSE TO RAIN, STORE INDOORS.

The substances used with this spray applicator (paint, thinners etc) may contain hazardous, harmful, explosive or corrosive materials.

ALWAYSCOMPLY WITH THE SAFETY INSTRUCTIONS ISSUED WITH THIS PRODUCT AND THE MATERIAL BEING USED.

Your Spray Station must only be used with paints and solvents that have a suitable flash point for spraying. If in doubt, consult the paint

or solvent manufacturer's data.

Always ensure there is adequate ventilation when spraying.

NEVER spray near an open flame, including an appliance pilot flame. NEVER smoke when spraying.

Always disconnect the unit from the power supply when cleaning the spray applicator.

Always ensure the spray area is safe and free from all debris that may present a fire or trip hazard.

NEVER, under any circumstances, point the spray gun at another

person or animal. In the event of injury occurring, seek expert medical advice immediately.

Questions? Call toll free: 888-783-2612

NEVER allow children or unauthorised users to operate or play with the spray equipment. This equipment is for professional use only.

Always read the paint manufacturer's thinning instructions before use. Always wear the correct protective face mask when spraying. We also

recommend wearing gloves, goggles and overalls.

After every use ensure that you clean the spray gun thoroughly and grease the gland washer.

Use only genuine manufacturer replacement parts.

Only use the spray equipment as detailed in these instructions. Do not use the air hose or power cord to pull the HVLP unit.

Check the hose, hose connectors and power cord daily. Any worn or damaged parts should be replaced immediately.

This appliance is recommended for household use only.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

IMPORTANT ELECTRICAL INFORMATION

EXTENSION CORDS

Your Earlex Spray Station is supplied with a power cord that is 6 feet long. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. For lengths between 0 feet and 50 feet, 18 AWG extension cords should be used.

DOUBLE INSULATED APPLIANCE

This is a double insulated appliance and as such, does not require three-way grounding. This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other) and does not require a grounding adapter. This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact a MAINS qualified electrician to replace the obsolete or damaged outlet. Do not defeat the safety purpose of the polarized plug. SWITCH

SHOWN IN

OFF POSI-

TION

The following parts are available from Earlex Inc. Please call our toll free helpline: 888-783-2612

PARTS LIST

Part No

Key Description

1.

Air cap ring

L0151

2.

Air cap

L0152

3.

Air distributor plate sssy

L0162

4.

Fluid tip, 0.08”

L0157

5.

Fluid tip seal

L0159

6.

Pivot screw

L0179

7.

Washer

L0195

8.

Main body assy

L0180

9.

Fluid needle 0.08”

L0166

10.

Adaptor

L0174

11.

Spring

L0175

12.

Adjusting screw

L0176

13.

Pivot

L0178

14.

Air feed tube

L0182

15.

Gland nut

L0173

Key Description

16. Gland washer (2 pcs)

17. Paint container

18. Centre bolt nut

19. Gasket

20. Lid assy

21. Shim

22. Clamp lever

23. Yoke

24. Centre bolt & pick up tube assy

25. Operating lever

26. Viscosity cup

27. Spanner

28. Filter (not shown)

29. Hose 13ft

30. Hose clip

Part No L0168 L0190 L0189 L0188 L0187 L0186 L0185 L0184 L0183 L0177 SG243 L0191 L0058 L1107 L1289

OPTIONAL EXTRAS

Needles and fluid tips of different sizes can be obtained as sets under the following accessory numbers. Please call our toll free helpline to order these

on 888-783-2612.

HV5ACC10USR

0.08”/ 2.0mm dia fluid tip, needle & seal

HV5ACC20USR

0.04”/ 1.0mm dia fluid tip, needle & seal

0.06”/ 1.5mm dia fluid tip, needle & seal

HV5ACC15USR

0.10”/ 2.5mm dia fluid tip, needle & seal

HV5ACC25USR

5

Image 5
Contents Earlex Spray Station HV5500 L132555000311.qxdLayout 2 7/3/11 1700 Exploded Parts View Diagrams L132555000311.qxdLayout 2 7/3/11 1700 Parts List Safety Operating InstructionsImportant Electrical Information Optional ExtrasSurface and JOB Preparation Important Selecting PaintThinning OperationCleaning Instructions Paint VolumeTechnique Fluid Tips and NeedlesTurbine Unit Periodic MaintenanceTroubleshooting Servicing of DOUBLE-INSULATED Appliances WarrantyAppareil À Double Isolation Informations Importantes Concernant LélectricitéListe DES Pièces Pièces SupplémentairesPréparation DE LA Surface ET DU Travail Important Selection DE LA PeintureDilution FonctionnementTechnique DE Pulvérisation Maintenance PériodiqueSélection DE LA Buse ET DU Pointeau Conseils UtilesIdentification DES Pannes Unité À TurbineGarantie Entretien DES Appareilsa Double IsolationAparato CON Aislamiento Doble Importante Información Sobre LA ElectricidadListade Piezas Cables DE ProlongaciónViscosidad Y Dilución Importante Selección DE LA PinturaDilución FuncionamientoTécnica DE Pulverización Volumen DE PinturaSelección DE LA Boquilla Y LA Aguja DE Fluido Consejos ÚtilesUnidad DE Turbina Solución DE ProblemasMantenimiento Periódco Garantía Servicio DE Aparatoscon Aislamiento DobleL132555000311.qxdLayout 2 7/3/11 1701 L132555000311.qxdLayout 2 7/3/11 1701 Earlex Inc L1325 03/11

hv5500, HV5500US specifications

The Earlex HV5500US is an innovative and versatile paint sprayer, designed specifically for both DIY enthusiasts and professionals alike. Offering superior performance and ease of use, this machine is perfect for tackling a wide range of projects, from furniture refinishing to home improvement tasks. With its advanced features and technology, the HV5500US stands out in the landscape of airless paint sprayers.

One of the standout features of the HV5500US is its powerful 650-watt motor, which provides a consistent spray pattern and high-quality finish. This motor is efficient and capable of spraying a variety of materials, including latex paints, stains, and sealers. The ability to handle different types of coatings makes the HV5500US an exceptional choice for diverse applications.

The HV5500US employs a high-volume, low-pressure (HVLP) technology, which minimizes overspray while maximizing transfer efficiency. This technology allows users to gain full control over the spray pattern and material flow, leading to a more precise and professional finish. The unit includes three different spray patterns—horizontal, vertical, and circular—allowing users to adapt to different surfaces and project sizes.

Another significant characteristic of the HV5500US is its adjustable control knob, which enables users to fine-tune the flow of paint according to their needs. This means that whether you are painting a large surface or detailing furniture, the paint sprayer can be adjusted for optimal performance.

The lightweight and ergonomic design ensures that the sprayer is easy to maneuver. This is particularly beneficial during extended use, as users can work for longer periods without experiencing fatigue. The integrated carry handle and compact size make it a convenient tool for both storage and transport.

Additionally, the HV5500US features a quick and easy cleanup process with its detachable components, maximizing convenience after every project. The unit comes with a 13-foot air hose, allowing users to reach high or difficult-to-access areas without hassle.

In summary, the Earlex HV5500US is an exceptional tool that combines power, versatility, and user-friendly features. Its advanced HVLP technology, adjustable control, and lightweight design make it an indispensable asset for anyone looking to achieve professional-quality finishes efficiently and effectively. Whether for DIY projects or professional use, the HV5500US is built to deliver great results every time.