Graco Mark VII, Mark IV, Mark X, 795, 695, 1095, 1595 Switch Tip Installation

Page 16

Switch Tip Installation

1.Perform Pressure Relief Procedure, page 13.

2.Use spray tip (A) to insert OneSeal™ (B) into guard (C).

B A

ti13023a

3. Insert Switch Tip.

ti13024a

4. Screw assembly onto gun. Tighten.

ti2710a

Spray

1.Spray test pattern. Increase pressure to eliminate heavy edges. Use smaller tip size if pressure adjust- ment can not eliminate heavy edges.

ti18243a

2.Hold gun perpendicular, 10-12 in. (25-30 cm) from surface. Spray back and forth. Overlap by 50%. Trigger gun after moving and release before stop- ping.

ti18242a

Clearing Tip Clog

SKIN INJECTION HAZARD

Never point gun at your hand or into a rag!

1.Release trigger, engage trigger lock. Rotate SwitchTip. Disengage trigger lock. Trigger gun to clear clog.

ti13033a

2.Engage trigger lock. Return SwitchTip to original position. Disengage trigger lock and continue spray- ing.

ti13034a

332916C

Image 16

Contents Important Safety Instructions 332916CTable of Contents Models UltraMax II, Ultimate Max II ModelsTexSpray Models Gun + 6.4mm + 9.5mm120V US GroundingFire and Explosion Hazard Skin Injection HazardEquipment Misuse Hazard Electric Shock HazardPressurized Aluminum Parts Hazard Moving Parts Hazard695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark VII / Mark Standard Models695 / 795 / 1095 / 1595 Mark IV / Mark V / Mark VII / Mark ProContractor Models1095 / 1595 / Mark V IronMan Models Grounding Power RequirementsExtension Cords 10/16 Amp Switch PailsPressure Relief Procedure Setup Perform Pressure Relief Procedure, StartupSwitch Tip Installation Fast Flush ProContractor and IronMan models onlyProGuard Standard ModelsHose Reel ProContractor models onlyDigital Tracking System Operation Main MenuChange Display Units Job GallonsSecondary Menu Stored Data Press and hold DTS button to clear code to zeroCleanup Pump Armor What to Check What to do Type of Problem TroubleshootingMechanical/Fluid Flow Troubleshooting What to Check What to do Type of Problem Type of Problem What to Check HOW to Check ElectricalCheck voltage supply to Step Check Motor Thermal Switch Unplug thermal Times repeatedly Connectors Sprayer Will Not Run YESStep Sprayer Will Not Shut Off Sprayers Technical DataMetric Sprayers Sprayers Sprayers Mark IV Sprayers Mark V Sprayers Mark VII Sprayers Mark X Sprayers Graco Standard Warranty Graco Information

1095, 695, 1595, Mark IV, Mark VII specifications

The Graco Mark series is a renowned line of airless paint sprayers designed for professional contractors and serious DIY enthusiasts. Each model in this series brings its own unique features and technologies, catering to a range of applications and user preferences.

The Graco Mark VII is known for its high efficiency and durability. It features a powerful motor that allows for consistent pressure and delivery of a variety of coatings. This model is equipped with a proven piston pump technology, providing a smooth and reliable spray pattern. Its compact design makes it easy to transport, while enhanced filtration systems ensure a clean finish by minimizing clogs and maintaining a steady flow of paint.

Moving on to the Graco Mark IV, this model offers versatility for both small and medium-sized projects. The Mark IV’s lightweight design, combined with an adjustable pressure control, allows users to fine-tune their spray for different materials, from heavy latex paints to stains. The inclusion of 2-finger trigger control and ergonomic handle enhances user comfort during extended use. Additionally, the Mark IV comes with a range of tip sizes, accommodating various application needs.

The Graco Mark V takes performance a notch higher. It is equipped with advanced technology for increased efficiency and reduced overspray. The innovative SmartControl system enables operators to set the pressure for a perfect finish, whether they are working on detailed trim work or expansive wall surfaces. Furthermore, the Mark V’s robust build and high-capacity intake system make it ideal for larger projects, ensuring consistent output throughout.

The Graco 1595 model is designed for heavy-duty applications and is particularly favored for its reliable performance in tough conditions. It boasts a heavy-duty pump that can handle high viscosity materials without compromising the finish. Along with an adjustable flow rate, the durable construction ensures longevity, making it a worthwhile investment for contractors who frequently tackle extensive jobs.

Lastly, the Graco Mark X is another high-performance sprayer that stands out for its advanced technology integration. With features such as automatic pressure adjustment and a digital display, users can achieve a precise spray application with ease. The Mark X also emphasizes user safety with built-in safeguards, including automatic shut-off systems. Its larger capacity makes it suitable for commercial-grade projects, ensuring effective coverage and efficiency.

In summary, the Graco Mark series, including the Mark VII, Mark IV, Mark V, 1595, and Mark X, offers a range of options with varied features and capabilities. Whether for small DIY tasks or large-scale commercial jobs, there is a model to meet every need, ensuring professional-quality results and user satisfaction.