Graco 1095, Mark VII, Mark IV, Mark X, 795, 695, 1595 important safety instructions Cleanup

Page 22

Cleanup

Cleanup

1.Perform Pressure Relief Procedure (page 13), steps 1 - 4. Remove tip guard from gun.

NOTE: Use water for water-base material, mineral spirits for oil-base material, or other solvents recom- mended by manufacturer.

2.Turn power ON. Turn prime valve forward to SPRAY position.

ti22943a

3.Increase pressure to 1/2. Hold gun against pail. Dis- engage trigger lock. Trigger gun until flushing fluid appears.

5.Turn prime valve down to DRAIN position and allow flushing fluid to circulate until flushing fluid appears clear.

ti22945a

6.Turn prime valve forward to SPRAY position. Trig- ger gun into flushing pail to purge fluid from hose.

ti22946a

ti18248a

7.Raise pump above flushing fluid and run sprayer for 15 to 30 seconds to drain fluid. Turn power OFF.

ti22944a

ti18249a

4.Move gun to waste pail, hold gun against pail, trig- ger gun to thoroughly flush system. Release trigger and engage trigger lock.

ti18248a

ti22947a

8.Turn prime valve down DRAIN position. Unplug sprayer.

ti22945a

22

332916C

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Important Safety Instructions 332916CTable of Contents Models UltraMax II, Ultimate Max II ModelsTexSpray Models Gun + 6.4mm + 9.5mm120V US GroundingFire and Explosion Hazard Skin Injection HazardPressurized Aluminum Parts Hazard Equipment Misuse HazardElectric Shock Hazard Moving Parts Hazard695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark VII / Mark Standard Models695 / 795 / 1095 / 1595 Mark IV / Mark V / Mark VII / Mark ProContractor Models1095 / 1595 / Mark V IronMan Models Grounding Power RequirementsExtension Cords 10/16 Amp Switch PailsPressure Relief Procedure Setup Perform Pressure Relief Procedure, StartupSwitch Tip Installation Fast Flush ProContractor and IronMan models onlyProGuard Standard ModelsHose Reel ProContractor models onlyChange Display Units Digital Tracking SystemOperation Main Menu Job GallonsSecondary Menu Stored Data Press and hold DTS button to clear code to zeroCleanup Pump Armor What to Check What to do Type of Problem TroubleshootingMechanical/Fluid Flow Troubleshooting What to Check What to do Type of Problem Type of Problem What to Check HOW to Check ElectricalCheck voltage supply to Step Check Motor Thermal Switch Unplug thermal Times repeatedly Connectors Sprayer Will Not Run YESStep Sprayer Will Not Shut Off Sprayers Technical DataMetric Sprayers Sprayers Sprayers Mark IV Sprayers Mark V Sprayers Mark VII Sprayers Mark X Sprayers Graco Standard Warranty Graco Information

1095, 695, 1595, Mark IV, Mark VII specifications

The Graco Mark series is a renowned line of airless paint sprayers designed for professional contractors and serious DIY enthusiasts. Each model in this series brings its own unique features and technologies, catering to a range of applications and user preferences.

The Graco Mark VII is known for its high efficiency and durability. It features a powerful motor that allows for consistent pressure and delivery of a variety of coatings. This model is equipped with a proven piston pump technology, providing a smooth and reliable spray pattern. Its compact design makes it easy to transport, while enhanced filtration systems ensure a clean finish by minimizing clogs and maintaining a steady flow of paint.

Moving on to the Graco Mark IV, this model offers versatility for both small and medium-sized projects. The Mark IV’s lightweight design, combined with an adjustable pressure control, allows users to fine-tune their spray for different materials, from heavy latex paints to stains. The inclusion of 2-finger trigger control and ergonomic handle enhances user comfort during extended use. Additionally, the Mark IV comes with a range of tip sizes, accommodating various application needs.

The Graco Mark V takes performance a notch higher. It is equipped with advanced technology for increased efficiency and reduced overspray. The innovative SmartControl system enables operators to set the pressure for a perfect finish, whether they are working on detailed trim work or expansive wall surfaces. Furthermore, the Mark V’s robust build and high-capacity intake system make it ideal for larger projects, ensuring consistent output throughout.

The Graco 1595 model is designed for heavy-duty applications and is particularly favored for its reliable performance in tough conditions. It boasts a heavy-duty pump that can handle high viscosity materials without compromising the finish. Along with an adjustable flow rate, the durable construction ensures longevity, making it a worthwhile investment for contractors who frequently tackle extensive jobs.

Lastly, the Graco Mark X is another high-performance sprayer that stands out for its advanced technology integration. With features such as automatic pressure adjustment and a digital display, users can achieve a precise spray application with ease. The Mark X also emphasizes user safety with built-in safeguards, including automatic shut-off systems. Its larger capacity makes it suitable for commercial-grade projects, ensuring effective coverage and efficiency.

In summary, the Graco Mark series, including the Mark VII, Mark IV, Mark V, 1595, and Mark X, offers a range of options with varied features and capabilities. Whether for small DIY tasks or large-scale commercial jobs, there is a model to meet every need, ensuring professional-quality results and user satisfaction.
Top Page Image Contents