Graco 1595, 795 Equipment Misuse Hazard, Electric Shock Hazard, Pressurized Aluminum Parts Hazard

Page 7

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Always wear appropriate gloves, eye protection, and a respirator or mask when painting.

•Do not operate or spray near children. Keep children away from equipment at all times.

•Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.

•Stay alert and watch what you are doing.

•Do not leave the unit energized or under pressure while unattended. When the unit is not in use, turn off the unit and follow the Pressure Relief Procedure for turning off the unit.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not kink or over-bend the hose.

•Do not expose the hose to temperatures or to pressures in excess of those specified by Graco.

•Do not use the hose as a strength member to pull or lift the equipment.

•Do not spray with a hose shorter than 25 feet.

•Do not alter or modify equipment. Alterations or modifications may void agency approvals and create safety hazards.

•Make sure all equipment is rated and approved for the environment in which you are using it.

ELECTRIC SHOCK HAZARD

This equipment must be grounded. Improper grounding, setup, or usage of the system can cause elec- tric shock.

•Turn off and disconnect power cord before servicing equipment.

•Connect only to grounded electrical outlets.

•Use only 3-wire extension cords.

•Ensure ground prongs are intact on power and extension cords.

•Do not expose to rain. Store indoors.

•Wait five minutes after disconnecting power cord before servicing large capacitor units.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or prop- erty damage.

•Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

•Many other fluids may contain chemicals that can react with aluminum. Contact your material sup- plier for compatibility.

MOVING PARTS HAZARD

Moving parts can pinch, cut or amputate fingers and other body parts.

•Keep clear of moving parts.

•Do not operate equipment with protective guards or covers removed.

•Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure and disconnect all power sources.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

332916C

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 332916C Important Safety InstructionsTable of Contents UltraMax II, Ultimate Max II Models ModelsGun + 6.4mm + 9.5mm TexSpray ModelsGrounding 120V USSkin Injection Hazard Fire and Explosion HazardMoving Parts Hazard Equipment Misuse HazardElectric Shock Hazard Pressurized Aluminum Parts HazardStandard Models 695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark VII / MarkProContractor Models 695 / 795 / 1095 / 1595 Mark IV / Mark V / Mark VII / Mark1095 / 1595 / Mark V IronMan Models Grounding Power RequirementsExtension Cords Pails 10/16 Amp SwitchPressure Relief Procedure Setup Startup Perform Pressure Relief Procedure,Switch Tip Installation ProContractor and IronMan models only Fast FlushStandard Models ProGuardProContractor models only Hose ReelJob Gallons Digital Tracking SystemOperation Main Menu Change Display UnitsPress and hold DTS button to clear code to zero Secondary Menu Stored DataCleanup Pump Armor What to Check What to do Type of Problem TroubleshootingMechanical/Fluid Flow Troubleshooting What to Check What to do Type of Problem Electrical Type of Problem What to Check HOW to CheckCheck voltage supply to Step Check Motor Thermal Switch Unplug thermal Times repeatedly Connectors YES Sprayer Will Not RunStep Sprayer Will Not Shut Off Sprayers Technical DataMetric Sprayers Sprayers Sprayers Mark IV Sprayers Mark V Sprayers Mark VII Sprayers Mark X Sprayers Graco Information Graco Standard Warranty

1095, 695, 1595, Mark IV, Mark VII specifications

The Graco Mark series is a renowned line of airless paint sprayers designed for professional contractors and serious DIY enthusiasts. Each model in this series brings its own unique features and technologies, catering to a range of applications and user preferences.

The Graco Mark VII is known for its high efficiency and durability. It features a powerful motor that allows for consistent pressure and delivery of a variety of coatings. This model is equipped with a proven piston pump technology, providing a smooth and reliable spray pattern. Its compact design makes it easy to transport, while enhanced filtration systems ensure a clean finish by minimizing clogs and maintaining a steady flow of paint.

Moving on to the Graco Mark IV, this model offers versatility for both small and medium-sized projects. The Mark IV’s lightweight design, combined with an adjustable pressure control, allows users to fine-tune their spray for different materials, from heavy latex paints to stains. The inclusion of 2-finger trigger control and ergonomic handle enhances user comfort during extended use. Additionally, the Mark IV comes with a range of tip sizes, accommodating various application needs.

The Graco Mark V takes performance a notch higher. It is equipped with advanced technology for increased efficiency and reduced overspray. The innovative SmartControl system enables operators to set the pressure for a perfect finish, whether they are working on detailed trim work or expansive wall surfaces. Furthermore, the Mark V’s robust build and high-capacity intake system make it ideal for larger projects, ensuring consistent output throughout.

The Graco 1595 model is designed for heavy-duty applications and is particularly favored for its reliable performance in tough conditions. It boasts a heavy-duty pump that can handle high viscosity materials without compromising the finish. Along with an adjustable flow rate, the durable construction ensures longevity, making it a worthwhile investment for contractors who frequently tackle extensive jobs.

Lastly, the Graco Mark X is another high-performance sprayer that stands out for its advanced technology integration. With features such as automatic pressure adjustment and a digital display, users can achieve a precise spray application with ease. The Mark X also emphasizes user safety with built-in safeguards, including automatic shut-off systems. Its larger capacity makes it suitable for commercial-grade projects, ensuring effective coverage and efficiency.

In summary, the Graco Mark series, including the Mark VII, Mark IV, Mark V, 1595, and Mark X, offers a range of options with varied features and capabilities. Whether for small DIY tasks or large-scale commercial jobs, there is a model to meet every need, ensuring professional-quality results and user satisfaction.
Top Page Image Contents