Graco 795, Mark V Digital Tracking System, Operation Main Menu, Change Display Units, Job Gallons

Page 20

Digital Tracking System (ProContractor and IronMan models only)

Digital Tracking System

(ProContractor and IronMan models only)

Operation Main Menu

Short press to move to next display. Press and hold (5 seconds) to change units or reset data.

ti22719a

1.Turn pressure to lowest setting. Trigger gun to relieve pressure. Turn prime valve down to DRAIN position.

ti22941a

2.Turn power ON. Pressure display appears. Dashes will not appear unless pressure is less than 200 psi (14 bar, 1,4 MPa).

ti22942a

Change Display Units

Press and hold DTS button for 5 seconds to change pressure units (psi, bar, MPa) to desired units. Selec- tion of bar or MPa changes gallons to liters x 10. To change display units DTS must be in pressure display mode and pressure must be at zero.

ti22876a

Job Gallons

1.Short press DTS button to move to Job Gallons (or liters x 10).

ti22717a

NOTE: JOB scrolls past, then the number of gallons sprayed above 400 psi (28 bar, 2.8 MPa) for Mark VII and Mark X displays; 1000 psi (70 bar, 7 MPa) for all other models.

2. Press and hold to reset to zero.

Lifetime Gallons

1.Short press DTS button to move to Lifetime Gallons (or liters x 10).

NOTE: LIFE scrolls briefly, then the number of gal- lons sprayed above 400 psi (28 bar, 2.8 MPa) for Mark VII and Mark X displays; 1000 psi (70 bar, 7 MPa) for all other models.

ti22718a

20

332916C

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Important Safety Instructions 332916CTable of Contents Models UltraMax II, Ultimate Max II ModelsTexSpray Models Gun + 6.4mm + 9.5mm120V US GroundingFire and Explosion Hazard Skin Injection HazardEquipment Misuse Hazard Electric Shock HazardPressurized Aluminum Parts Hazard Moving Parts Hazard695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark VII / Mark Standard Models695 / 795 / 1095 / 1595 Mark IV / Mark V / Mark VII / Mark ProContractor Models1095 / 1595 / Mark V IronMan Models Extension Cords Power RequirementsGrounding 10/16 Amp Switch PailsPressure Relief Procedure Setup Perform Pressure Relief Procedure, StartupSwitch Tip Installation Fast Flush ProContractor and IronMan models onlyProGuard Standard ModelsHose Reel ProContractor models onlyDigital Tracking System Operation Main MenuChange Display Units Job GallonsSecondary Menu Stored Data Press and hold DTS button to clear code to zeroCleanup Pump Armor Mechanical/Fluid Flow TroubleshootingWhat to Check What to do Type of Problem Troubleshooting What to Check What to do Type of Problem Type of Problem What to Check HOW to Check ElectricalCheck voltage supply to Step Check Motor Thermal Switch Unplug thermal Times repeatedly Connectors Sprayer Will Not Run YESStep Sprayer Will Not Shut Off Metric Technical DataSprayers Sprayers Sprayers Sprayers Mark IV Sprayers Mark V Sprayers Mark VII Sprayers Mark X Sprayers Graco Standard Warranty Graco Information

1095, 695, 1595, Mark IV, Mark VII specifications

The Graco Mark series is a renowned line of airless paint sprayers designed for professional contractors and serious DIY enthusiasts. Each model in this series brings its own unique features and technologies, catering to a range of applications and user preferences.

The Graco Mark VII is known for its high efficiency and durability. It features a powerful motor that allows for consistent pressure and delivery of a variety of coatings. This model is equipped with a proven piston pump technology, providing a smooth and reliable spray pattern. Its compact design makes it easy to transport, while enhanced filtration systems ensure a clean finish by minimizing clogs and maintaining a steady flow of paint.

Moving on to the Graco Mark IV, this model offers versatility for both small and medium-sized projects. The Mark IV’s lightweight design, combined with an adjustable pressure control, allows users to fine-tune their spray for different materials, from heavy latex paints to stains. The inclusion of 2-finger trigger control and ergonomic handle enhances user comfort during extended use. Additionally, the Mark IV comes with a range of tip sizes, accommodating various application needs.

The Graco Mark V takes performance a notch higher. It is equipped with advanced technology for increased efficiency and reduced overspray. The innovative SmartControl system enables operators to set the pressure for a perfect finish, whether they are working on detailed trim work or expansive wall surfaces. Furthermore, the Mark V’s robust build and high-capacity intake system make it ideal for larger projects, ensuring consistent output throughout.

The Graco 1595 model is designed for heavy-duty applications and is particularly favored for its reliable performance in tough conditions. It boasts a heavy-duty pump that can handle high viscosity materials without compromising the finish. Along with an adjustable flow rate, the durable construction ensures longevity, making it a worthwhile investment for contractors who frequently tackle extensive jobs.

Lastly, the Graco Mark X is another high-performance sprayer that stands out for its advanced technology integration. With features such as automatic pressure adjustment and a digital display, users can achieve a precise spray application with ease. The Mark X also emphasizes user safety with built-in safeguards, including automatic shut-off systems. Its larger capacity makes it suitable for commercial-grade projects, ensuring effective coverage and efficiency.

In summary, the Graco Mark series, including the Mark VII, Mark IV, Mark V, 1595, and Mark X, offers a range of options with varied features and capabilities. Whether for small DIY tasks or large-scale commercial jobs, there is a model to meet every need, ensuring professional-quality results and user satisfaction.
Top Page Image Contents