Graco AA2000 manual Adjust the Spray Pattern & Apply, Fluid ’

Page 9

Operation

Adjust the Spray Pattern & Apply

the Fluid (Continued’

1.Increase the fluid pressure just to the point where a further increase in fluid pressure does not sig- nificantly improve fluid atomization. Do not exceed 950 psi (66 bar) fluid pressure to the gun.

2.Close the pattern adjustment valve by turning the knob (see Fig. 3) counterclockwise all the way. This sets the gun for its widest pattern

3.Set the atomizing air pressure at about 5 psi (0.35 bar). Check the spray pattern, then adjust the air pressure until all the tails are completely atomized and pulled into the spray pattern. See Fig. 4.

NOTE: Do not exceed 10 psi (0.7 bar) air pressure to the gun. The air cap supplied with this gun was designed to operate at or below 10 psi (0.7 bar) air pressure to comply with California Wood Rule 1136.

For a narrower pattern, turn the pattern adjust- ment valve knob clockwise. If the pattern is still not narrow enough, increase the air pressure to the gun slightly or use a different size tip.

NOTE: For some spray tips, when the line air pres- sure to the gun is increased to a certain level, the spray pattern will become round. This is the smallest pattern width. Further increases in air pressure will force the pattern to turn from horizontal to vertical or from vertical to horizontal.

4.When applying the fluid, keep the gun a consis- tant distance, 8 to 10 inches (200 to 250 mm), from the surface of the object being sprayed. Always hold the gun at a right angle from the sur- face. Do not make an arc with the gun as it causes an uneven coat of fluid. See Fig. 5.

RIGHT

WRONG0793

307-947 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents High Efficiency Low Pressure System Part Number 222-615, Series CThis manual contains important Table of Contents Fluid Injection Hazard Object being sprayed according to local code Ground according to the manufacturer’s recom- mendationsSystem Pressure Fluid CompatibilityVentilate the Spray Booth InstallationRequired Accessories KEYConnect the Air Line OperationConnect the Fluid Line GroundingAdjust the Spray Pattern & Apply the Fluid Install a Spray TipSelect a Spray Tip Vertical Spray Pattern Horizontal Spray PatternFluid ’ Adjust the Spray Pattern & ApplyClean the Spray Gun & System Daily Clean the system’s fluid filter and air line filterFlush the Gun Daily General Troubleshooting TroubleshootingSpray Pattern Troubleshooting Problem Cause Improper Spray PatternService Air Valve ServiceFluid Packing Replacement Service Notes For Direct Hose Connection Service Notes See for additional InformatlonQty Optional PartsAIR CAP DIFFUSER-SEATAccessories 1Ol Monark Pump Air Pressure Verification KitStandard Spray Tips Spray Tip SelectionDimensions Technical DataHigh Molecular Weight Polyethylene,PTFE Delrin@ Manual Change SummaryWarranty Grace Warranty and DisclaimersGrace Phone Numbers Grace l-800-328-0211 Toll Free

AA2000 specifications

The Graco AA2000 is an advanced airless paint sprayer designed for effortless painting and finishing applications. Targeting both professional contractors and DIY enthusiasts, the AA2000 offers a blend of power, efficiency, and versatility, making it an ideal choice for various projects, from residential renovations to larger commercial jobs.

One of the standout features of the Graco AA2000 is its robust motor, which delivers consistent pressure and performance, enabling users to achieve a smooth, even finish. The sprayer is capable of handling a wide range of coatings, including latex, oil-based paints, and stains, giving users the flexibility to tackle diverse tasks with ease. The maximum operating pressure of up to 3000 PSI ensures that the AA2000 can spray even the thickest of paints without clogging or sputtering.

Incorporating Graco's SmartControl technology, the AA2000 allows for precise pressure adjustments, ensuring optimal performance based on the specific requirements of the job. This feature not only provides enhanced control over the spray pattern but also reduces overspray, saving both paint and time. Additionally, the built-in Easy Prime technology allows for fast priming of the sprayer, minimizing downtime and allowing users to get straight to work.

The AA2000 is equipped with a lightweight design, which enhances portability and ease of use. The ergonomic handle and adjustable spray gun reduce hand fatigue during extended use, making it suitable for long painting sessions. The unit also features an easy-to-use control panel that simplifies operation, making it accessible for users of all skill levels.

Another significant characteristic of the Graco AA2000 is its easy maintenance and quick cleanup capability. The machine is designed with a flushing system that allows for rapid cleaning of the sprayer after use, ensuring that the unit remains in optimal condition for future projects.

Finally, the durability of the Graco AA2000 is backed by high-quality materials and construction, making it a reliable investment for anyone looking to achieve professional results. In summary, the Graco AA2000 stands out as a powerful and user-friendly airless paint sprayer, equipped with innovative technologies and features that elevate the painting experience for users, both novice and experienced alike.
Top Page Image Contents