Graco 310649C important safety instructions Automatic Plural Component, Impingement Mix Spray Gun

Page 1

Instructions - Parts

310649C

EN

Automatic Plural Component, Impingement Mix Spray Gun

For use with non-flammable foam and polyurea.

Not for use in explosive atmospheres.

3500 psi (24.2 MPa, 242 bar) Maximum Fluid Working Pressure 80-130 psi (0.55-0.9 MPa, 5.5-9.1 bar) Air Inlet Pressure Range 200°F (94°C) Maximum Fluid Temperature

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

Air Purge Gun

For model information and related manuals, see page 3.

Mechanical Purge Gun

For model information and related manuals, see page 4.

US Patent No. D479,305

Korean Patent No. 338185

Australian Patent No. 152610

ROC Patent No. I288661

Chinese Patent No. ZL200380101833

Japanese Patent No. 4331721

TI4524b

TI4525b

Image 1

Contents Automatic Plural Component, Impingement Mix Spray Gun Important Safety InstructionsManual Conventions ContentsRound Pattern Guns Air Purge GunsFlat Pattern Guns Related ManualsStandard Round Pattern Guns Mechanical Purge GunsDirect Impingement Round Pattern Guns Direct Impingement Flat Pattern GunsSkin Injection Hazard Burn Hazard Isocyanate Hazard Keep a and B Components SeparateFollow Pressure Relief Procedure, Piston Safety LockGrounding Turning Air CapMechanical Purge Gun Shown Overall ViewKey Mounting gun to rod InstallationMounting gun to stationary support or robot arm Connecting airline and accessories ISO SetupTurn on proportioner Pressure Relief Procedure Shutdown 310649C Air Purge Gun PartsManifold Part No. Description QtyDetail Mechanical Purge GunAIR CAP Mounting Dimensions Accessories Technical DataCategory Data Part No. DescriptionGraco Information Graco Standard WarrantyToll Free