Graco 310649C important safety instructions Pressure Relief Procedure

Page 13

Pressure Relief Procedure

Pressure Relief Procedure

Read warnings, page 5. Relieve pressure before cleaning or repairing gun.

1. Engage piston safety lock.

TI3850A

CAUTION

Air supply is required for gun actuation. Do not dis- connect gun air supply until fluid pressure is relieved.

2. Close fluid valves A and B. Leave air inlet (W)

open.

B

TI4752A

A

3. Disengage piston safety lock.

4. Actuate gun onto cardboard or into waste con-

tainer to relieve pressure.

TI4753a

5. Engage piston safety lock.

TI3850A

Fluid in the hose and proportioner is still under pres- sure. Follow the Pressure Relief Procedure in the pro- portioner manual.

To relieve pressure in the hose after the gun is removed, place the fluid manifold over containers, fac- ing away from you. Very carefully open the fluid valves. Under high pressure, fluid will spray sideways from the fluid ports.

TI3849A

TI2484A

310649C

13

Image 13
Contents Automatic Plural Component, Impingement Mix Spray Gun Important Safety InstructionsManual Conventions ContentsRound Pattern Guns Air Purge GunsFlat Pattern Guns Related ManualsStandard Round Pattern Guns Mechanical Purge GunsDirect Impingement Round Pattern Guns Direct Impingement Flat Pattern GunsSkin Injection Hazard Burn Hazard Isocyanate Hazard Keep a and B Components SeparateFollow Pressure Relief Procedure, Piston Safety LockGrounding Turning Air CapMechanical Purge Gun Shown Overall ViewKey Mounting gun to rod InstallationMounting gun to stationary support or robot arm Connecting airline and accessories ISO SetupTurn on proportioner Pressure Relief Procedure Shutdown 310649C Air Purge Gun PartsManifold Part No. Description QtyDetail Mechanical Purge GunAIR CAP Mounting Dimensions Accessories Technical DataCategory Data Part No. DescriptionGraco Information Graco Standard WarrantyToll Free