Sony Mastering Automatic Clock Adjustments on Camcorders

Adjusting the clock and the area automatically (AUTO CLOCK ADJ/

AUTO AREA ADJ)

Your camcorder can maintain accurate time and compensate for time difference automatically, by acquiring time and location information from GPS.

Touch (MENU) [Show

others] [CLOCK/LANG] (under [GENERAL SET] category) [AUTO CLOCK ADJ]/[AUTO AREA ADJ].

Touch a desired setting 

.

Notes

You must set the date and time on your camcorder before using your camcorder (p. 15).

There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated.

The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the GPS switch is set to ON.

The [AUTO AREA ADJ] function automatically compensates for a time difference when it detects a time differences with the current area.

The clock may not be adjusted to the correct time automatically, depending on the country/ region selected for your camcorder. In this case, set [AUTO CLOCK ADJ] and [AUTO AREA ADJ] to [OFF].

Making good use of your camcorder

GB

51