Sony HDR-XR350 116, To change the battery of the Wireless Remote Commander, Insulation sheet, Tab

SCAN/SLOW buttons (29)

/ (Previous/Next) buttons (29)

PLAY button STOP button

DISPLAY button (21) Transmitter

START/STOP button (20) Power zoom buttons PAUSE button

VISUAL INDEX button (29)

Displays a VISUAL INDEX screen during playback.

////ENTER buttons

When you press any of these buttons, the orange frame appears on the LCD screen. Select a desired button or an item with ///, then press ENTER to enter.

Notes

Remove the insulation sheet before using the Wireless Remote Commander.

Insulation sheet

Point the Wireless Remote Commander towards the remote sensor to operate your camcorder (p. 114).

When no commands have been sent from the Wireless Remote Commander within a certain period, the orange frame disappears. When you press any of ///, or ENTER again, the frame appears at the position where it was displayed last.

You cannot select some buttons on the LCD screen using ///.

To change the battery of the Wireless Remote Commander

While pressing on the tab, inset your fingernail

into the slit to pull out the battery case.

Place a new battery with the + side facing up.  Insert the battery case back into the Wireless

Remote Commander until it clicks.

Tab

WARNING

Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

When the lithium battery becomes weak, the operating distance of the Wireless Remote Commander may shorten, or the Wireless Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

GB

116