Sony HDR-CX350V, HD-RCX300 Self-diagnosis display/Warning indicators,  Battery level warning

Cannot use	Because of following settings
[PRIORITY	[GOLF SHOT], [SMTH
SETTING]/	SLW REC], [		DIGITAL
[SMILE	ZOOM], [SPOT MTR/FCS],
DETECTION]/	[SPOT METER], [SPOT
[SMILE	FOCUS], [EXPOSURE],
SENSITIVITY]	[FOCUS], [TWILIGHT],
	[SUNRISE&SUNSET],
	[FIREWORKS],
	[LANDSCAPE],
	[SPOTLIGHT], [BEACH],
	[SNOW], [WHITE BAL.],
	[	FADER], [	SELF-
	TIMER]
[SCENE	[GOLF SHOT], [SMTH
SELECTION]	SLW REC], [LOW LUX],
	[	FADER], [TELE
	MACRO]

Self-diagnosis display/Warning indicators

If indicators appear on the LCD screen, check the following.

If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. In this case, when you contact them, give them all the numbers of the error code beginning with C or E.

C:(or E:) :(Self-diagnosis display)

C:04:

The battery pack is not an “InfoLITHIUM” battery pack (V series). Use an “InfoLITHIUM” battery pack (V series) (p. 105).

Connect the DC plug of the AC Adaptor to the DC IN jack of your camcorder securely (p. 12).

C:06:

The battery pack temperature is high. Change the battery pack or place it in a cool place.

C:13:/ C:32:

Remove the power source. Reconnect it and operate your camcorder again.

E::

Follow the steps from  to  on page 85.

(Warning on the internal hard disk of the camcorder)

Fast flashing

The internal hard disk of the camcorder is full.

An error may have occurred with the internal hard disk of the camcorder.

(Battery level warning)

Slow flashing

The battery pack is nearly used up.

Depending on the operating environment or battery conditions,  may flash, even if there are about 20 minutes remaining.

(Warning indicator pertaining to battery pack temperature)

The battery pack temperature is high. Change the battery pack or place it in a cool place.

(High temperature warning)

Slow flashing

The temperature of your camcorder is getting higher. Turn off your camcorder and leave it for a while in a cool place.

Fast flashing

The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.

(Low temperature warning)

Fast flashing

The temperature of your camcorder is extremely low. Make the camcorder warm.

GB

92