Graco 310649C important safety instructions Connecting airline and accessories

Installation

Connecting airline and accessories

1. On each gun air supply line, install an air pressure

regulator.

•It is recommended that the tip clean off air, gun actuation, and gun deactuation air be supplied and regulated separately.

•A minimum of 80 psi (.55 mpa, 5.5 bar) air pres- sure must be supplied to the gun for proper operation.

•A three-way air valve, which exhausts cylinder air, is required.

2.On each gun air supply line, install a bleed-type air shut off valve down stream of the gun air regulator.

3.On the main air line, install a bleed-type air shut off valve.

Clean off air

Three 1/8 in. - 27 npt ports (air inlet)

Gun actuation

Gun deactuation

ti4751b

10 310649C