Switch Tip Installation
1.Use spray tip (A) to insert OneSeal™ (B) into guard (C).
C
B A
ti13023a
2. Insert Switch Tip.
ti13024a
3. Screw assembly onto gun. Tighten.
ti2710a
Switch Tip Installation
Spray
1.Spray test pattern. Increase pressure to eliminate heavy edges. Use smaller tip size if pressure adjust- ment can not eliminate heavy edges.
ti13030a
2.Hold gun perpendicular,
ti13025a
Clearing Tip Clog
1.Release trigger, put safety ON. Rotate SwitchTip. Take safety OFF. Trigger gun to clear clog. Never point gun at your hand or into a rag!
ti10166a | ti13033a | ti10167a |
2.Put safety ON. Return SwitchTip to original position. Take safety OFF and continue spraying.
ti10166a | ti13034a | ti10167a |
3A0156B | 11 |