Graco 130HS important safety instructions Hydraulic Motor Yoke

Page 15

Hydraulic Motor Yoke

Removal

1.Relieve pressure, page 7.

2.Place drip pan or rags under sprayer to catch hydraulic oil that leaks out during repair.

3.FIG. 5. Slide retainer clip (194) down to remove. Remove pump pin (249).

4.Remove hydraulic lines (35, 250) from fittings (217) at top left and right side of hydraulic motor.

5.Loosen jam nut (183).

6.Unscrew and remove hydraulic motor cap (25).

7.Slide piston rod/hydraulic motor cap assembly (A) from hydraulic motor cylinder (69).

Hydraulic Motor Yoke

Installation

1.Slide piston rod assembly (A) into hydraulic motor cylinder.

2.Screw down hydraulic motor cap (25) until cap bot- toms out. Unscrew hydraulic motor cap until inlet and outlet align with hydraulic line fittings and test hole in hydraulic motor cap points toward belt guard

3.Torque jam nut (183) against hydraulic motor cap

(25)to 150 ft-lb (17 N•m).

4.Install hydraulic lines (35, 250) to fittings (217) to top left and right side of hydraulic motor per procedure on page 6; torque to 40 ft-lb (54.2 N•m).

5.Pull start rope slowly to align pin holes of hydraulic motor and displacement pump (21). Connect with pump pin (249); and retainer clip (194), page 18.

6.Start engine and operate pump for 30 seconds. Turn engine OFF. Check hydraulic oil level and fill with Graco hydraulic oil, page 7.

313776G

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents LineLazer 130 HS Contents Fire and Explosion Hazard Equipment Misuse Hazard Tip Selection SAE O-Ring Installation General Repair InformationGrounding Maintenance Pressure Relief ProcedureCaster Wheel Problem Cause Solution TroubleshootingOr worn and that ball seats well. Reassemble Displacement pump outlet filter if used is dirty or Installation Hydraulic PumpRemoval 195 Fan Belt Engine Do Fan Belt, InstallationHydraulic Motor Yoke Ti13918a Oil/Filter Change Remove suction tube 34 and hose Displacement PumpLineLazer IV 130HS Parts290 Part Description Qty Detail Torque to 90-110 in-lb Torque to 10-20 ft-lb Parts LineLazer IV 130HS Screw 138 231 Kits 193 Washer Detail a JAW Accessories Technical Data313776G Graco Information Graco Standard Warranty

130HS specifications

The Graco 130HS is a highly regarded airless paint sprayer, designed to meet the demands of both professionals and DIY enthusiasts. This versatile tool excels in providing smooth, even coverage across a variety of surfaces, making it an essential addition to any painting arsenal.

One of the primary features of the Graco 130HS is its robust performance capabilities. It boasts a powerful motor that can handle a wide range of materials, from thin stains to thicker paints. This flexibility allows users to tackle a variety of projects, including residential and commercial applications. The sprayer has a maximum pressure rating of 3000 PSI, which ensures that it can atomize even the most challenging coatings, delivering a consistent finish.

Another standout characteristic of the Graco 130HS is its LightSpeed technology, which optimizes spray patterns and reduces overspray. This feature not only saves material but also enhances precision, making it easier to paint intricate surfaces without the worry of unintended coverage. The adjustable pressure settings give users the ability to control the flow of paint, further allowing for customization based on the specific project requirements.

The Graco 130HS also incorporates a durable build quality that's designed for long-term use. Constructed with high-grade materials, it can withstand the rigors of day-to-day operation on various job sites. Its compact and portable design makes it easy to transport, enabling users to move from one project location to another with ease.

Moreover, the user-friendly interface features a simple setup process, allowing for quick preparation and less downtime before work begins. The spray tip system is designed for easy swapping, providing versatility in achieving different spray patterns and finishes.

In conclusion, the Graco 130HS airless paint sprayer is an efficient, reliable tool that brings professional-grade performance to both seasoned painters and novices alike. With its powerful motor, innovative technologies, and durable construction, it stands out in the market, ensuring that every project is completed with precision and ease. Whether you’re painting a room, a fence, or undertaking a larger renovation, the Graco 130HS provides the capability and reliability needed to achieve stunning results.
Top Page Image Contents