Graco 130HS important safety instructions Equipment Misuse Hazard

Page 4

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS forms from distributor or retailer.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

•Keep clear of moving parts.

•Do not operate equipment with protective guards or covers removed.

•Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDS’s to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

•Always wear impervious gloves when spraying or cleaning equipment.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

•Protective eyewear

•Clothing and respirator as recommended by the fluid and solvent manufacturer

•Gloves

•Hearing protection

RECOIL HAZARD

Gun may recoil when triggered. If you are not standing securely, you could fall and be seriously injured.

4

313776G

Page 3 Page 5
Image 4
Page 3 Page 5
Contents LineLazer 130 HS Contents Fire and Explosion Hazard Equipment Misuse Hazard Tip Selection General Repair Information SAE O-Ring InstallationGrounding Pressure Relief Procedure MaintenanceCaster Wheel Troubleshooting Problem Cause SolutionOr worn and that ball seats well. Reassemble Displacement pump outlet filter if used is dirty or Hydraulic Pump InstallationRemoval 195 Fan Belt Do Fan Belt, Installation EngineHydraulic Motor Yoke Ti13918a Oil/Filter Change Displacement Pump Remove suction tube 34 and hoseParts LineLazer IV 130HS290 Part Description Qty Detail Torque to 90-110 in-lb Torque to 10-20 ft-lb Parts LineLazer IV 130HS Screw 138 231 Kits 193 Washer Detail a JAW Technical Data Accessories313776G Graco Standard Warranty Graco Information

130HS specifications

The Graco 130HS is a highly regarded airless paint sprayer, designed to meet the demands of both professionals and DIY enthusiasts. This versatile tool excels in providing smooth, even coverage across a variety of surfaces, making it an essential addition to any painting arsenal.

One of the primary features of the Graco 130HS is its robust performance capabilities. It boasts a powerful motor that can handle a wide range of materials, from thin stains to thicker paints. This flexibility allows users to tackle a variety of projects, including residential and commercial applications. The sprayer has a maximum pressure rating of 3000 PSI, which ensures that it can atomize even the most challenging coatings, delivering a consistent finish.

Another standout characteristic of the Graco 130HS is its LightSpeed technology, which optimizes spray patterns and reduces overspray. This feature not only saves material but also enhances precision, making it easier to paint intricate surfaces without the worry of unintended coverage. The adjustable pressure settings give users the ability to control the flow of paint, further allowing for customization based on the specific project requirements.

The Graco 130HS also incorporates a durable build quality that's designed for long-term use. Constructed with high-grade materials, it can withstand the rigors of day-to-day operation on various job sites. Its compact and portable design makes it easy to transport, enabling users to move from one project location to another with ease.

Moreover, the user-friendly interface features a simple setup process, allowing for quick preparation and less downtime before work begins. The spray tip system is designed for easy swapping, providing versatility in achieving different spray patterns and finishes.

In conclusion, the Graco 130HS airless paint sprayer is an efficient, reliable tool that brings professional-grade performance to both seasoned painters and novices alike. With its powerful motor, innovative technologies, and durable construction, it stands out in the market, ensuring that every project is completed with precision and ease. Whether you’re painting a room, a fence, or undertaking a larger renovation, the Graco 130HS provides the capability and reliability needed to achieve stunning results.
Top Page Image Contents