Table of Contents
Warnings | . 2 | Displacement Pump Service | 16 |
Component Identification | . 5 | Sprayer Parts Drawing | 18 |
Setup | . 5 | Sprayer Parts List | 34 |
Flushing | . 8 | Accessories | 37 |
Operation | 10 | Technical Data | 37 |
Maintenance | 12 | Graco Warranty | 38 |
Troubleshooting | 13 | Graco Information | 38 |
Symbols
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to equipment if you do not follow the instructions.
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
DThis equipment is for professional use only.
DRead all instruction manuals, tags, and labels before operating the equipment.
DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor. D Do not alter or modify this equipment. Use only genuine Graco parts.
D Check equipment daily. Repair or replace worn or damaged parts immediately.
DDo not exceed the maximum working pressure of the lowest rated system component. Refer to the Technical Data on page 37 for the maximum working pressure of this equipment.
DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.
DDo not use hoses to pull equipment.
DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 82_C (180_F) or below
DDo not lift pressurized equipment.
DComply with all applicable local, state, and national fire, electrical, and safety regulations. D Wear hearing protection when operating this equipment.
DDo not use
2 308972