Graco Inc 4600SC, 308-084 Graco Warranty and Disclaimers, Graco Phone Numbers, Minneapolis, Mn

Page 36

THE GRACO WARRANTY AND DISCLAIMERS

WARRANTY

Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workman- ship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty, Graco will, for a period of twelve months or two thousand hours of operation from time of sale, repair or replace any part of the equipment proven defective. However, any deficiency in the barrel, handle, trigger, hook, internal power supply, and alternator (excluding turbine bearings) will be repaired or replaced for thirty-six months or six thousand hours of operation from time of sale. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty instal- lation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco equipment of structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materi- als not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor and transportation.

DISCLAIMERS AND LIMITATIONS

The terms of this warranty constitute purchaser’s sole and exclusive remedy and are in lieu of any other warranties (express or im- plied), including warranty of merchantability or warranty of fitness for a particular purpose, and of any non–contractual liabili- ties, including product liabilities, based on negligence or strict liability. Every form of liability for direct, special or consequential dam- ages or loss is expressly excluded and denied. in no case shall Graco’s liability exceed the amount of the purchase price. Any action for breach of warranty must be brought within two (2) years of the date of sale.

EQUIPMENT NOT COVERED BY GRACO WARRANTY

Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose, with re- spect to accessories, equipment, materials, or components sold but not manufactured by Graco. These items sold, but not manu-

factured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

GRACO PHONE NUMBERS

TO PLACE AN ORDER, contact your Graco distributor,

FOR TECHNICAL ASSISTANCE, service repair infor-

or call Graco: 1–800–367–4023 Toll Free

mation or answers about the application of Graco equip-

 

ment, call: 1–800–543–0339 Toll Free

Sales Offices: Atlanta, Chicago, Dallas, Detroit, Los Angeles, Mt. Arlington (N.J.)

Foreign Offices: Canada; England; Switzerland; France; Germany; Hong Kong; Japan; Korea

GRACO INC. P.O. BOX 1441

MINNEAPOLIS, MN 55440–1441

PRINTED IN U.S.A. 308–084

June 1991 Revised January 1995

36 3￿￿￿￿￿4

Image 36
Contents Part No -224, Series a Air Spray Gun, without shroud Part No -893, Series aPart No -894, Series a Part No -094 Series a Gun ManifoldHose Safety Equipment Misuse HazardHazardous Fluid Hazard Flushing and Cleaning Safety Ventilate the Spray BoothFIRE, EXPLOSION, or Electrostatic Shock Hazard GroundingTable of Contents Typical Installation Installing the SystemSystem Options Spraying Voltage MonitorInstallation Ventilate the Spray BoothInstall the Gun Mounting Bracket Install the Gun and Manifold See FigAccessories section Air Cap/Air Cap NutInstall the Fabric Cover See Fig Check the Electrical Grounding See FigOperating Checklist Adjusting the Spray PatternOperation Selecting a Fluid Nozzle and Air Cap Gun FunctionsMaintenance Adjusting the Turbine Air PressureDaily Care and Cleaning Activating the Voltage Select KV HI/LOClean the Air Cap and Fluid Nozzle Follow the Pressure Relief Procedure Warning onCheck for signs of fluid leakage where indicated by arrows Check for Fluid Leakage See FigSpray Pattern Troubleshooting Chart Problem Cause Solution Improper Spray PatternGUN Operation Troubleshooting Chart Problem Cause SolutionElectrical Troubleshooting Chart See Check the Electrical GroundingTest Power Supply Resistance See Fig Electrical TestsTest Gun Resistance See Fig 40dAir Cap/Nozzle/Resistor Stud Replacement Test Resistor Stud ResistanceService Service NotesFlush the Gun and Relieve Pressure Air Cap/Nozzle/Resistor Stud Replacement To install the resistor studElectrode Replacement Barrel Removal Barrel Installation Fluid Packing Rod Removal and Repair   Power Supply Removal and Replacement Power Supply AdjustmentTurbine Alternator Removal Replacement 40cSpray GUN Service Notes Manifold Service Notes Spray GUN Parts Drawing Detail aSpray GUN Parts List Part No -893, Series a Air Spray Gun, with standard shroudManifold Parts List Manifold Parts DrawingInstalling the PRO 4600HC Conversion Kit Sure Relief Procedure onPRO 4600HC Conversion KIT Accessories Gun Mount Assembly Volt Power SupplyMount Extensions 224-255/259 Nylon Fabric CoverBulkhead Connector Grounding Clamp and WireFiber Optic Cables MegohmmeterTechnical Data Manual Change SummaryGraco Warranty and Disclaimers Graco Phone NumbersMINNEAPOLIS, MN

308-084, 4600SC, 224-094, 235-894, 235893 specifications

Graco Inc. is a renowned company in the manufacturing of fluid handling systems and products, particularly focusing on industrial, automotive, and contractors' markets. Among its extensive range of offerings are specific models that have garnered attention for their performance and reliability. This article highlights several Graco product numbers, including 224-224, 235893, 235-894, 224-094, and 4600SC.

The model 224-224 is recognized for its versatile usage in paint applications, capable of accommodating various material types. It is equipped with Graco's innovative technology that ensures consistent and precise fluid delivery, making it ideal for both professional contractors and DIY enthusiasts. The device often includes features like a lightweight structure for easy maneuverability and an ergonomic design for enhanced user comfort.

Moving to the model 235893, it presents impressive durability and optimal performance in high-pressure scenarios. This model is particularly popular among heavy-duty applications, thanks to its ability to withstand the rigors of demanding environments. With advanced component engineering, the 235893 ensures minimal downtime and enhances efficiency, making it a go-to choice for professionals in need of reliability under pressure.

The 235-894 model stands out due to its unique pump design that optimizes material flow and reduces overspray. This characteristic is crucial for achieving professional-grade finishes with reduced waste, saving both time and resources. Additionally, its user-friendly interface allows operators to adjust settings easily, catering to varied application needs.

Next, the 224-094 model is tailored for precision and versatility, featuring a compact design suitable for tighter spaces. It is engineered for efficiency, allowing for rapid color changes without compromising performance. The advanced filtration system integrated within this model ensures that contaminants are minimized, safeguarding the integrity of the materials being used.

Lastly, the 4600SC model exemplifies Graco’s commitment to innovation, specifically tailored for airless spray applications. It is equipped with cutting-edge technology that maximizes control over pressure and flow rate, allowing for seamless operation in different environments. The model’s ability to adapt to various paints and coatings while providing a superior finish adds to its appeal.

In summary, Graco Inc. provides a range of high-performance products like the 224-224, 235893, 235-894, 224-094, and 4600SC, each with distinctive features and technologies that cater to a broad spectrum of fluid handling needs. These models reflect the company’s dedication to enhancing efficiency, durability, and user experience in fluid management across various industries.