Graco Inc 235893, 4600SC, 308-084, 235-894, 224-224, 224-094 manual Accessories

Page 32

ACCESSORIES

Accessories must be purchased separately.

Use only GENUINE GRACO PARTS AND ACCESSORIES.

AIR AND FLUID LINE ACCESSORIES

Air Pilot Paint Regulator 224–531

For controlling paint flow through the spray gun. Connects to mount assembly 235–094.

0331

Grounded Air Supply Hose

100 psi (7 bar) MAXIMUM WORKING PRESSURE 0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) LH;

Color coded black

PART NO.

LENGTH

220–444

6 ft (1.8 m)

218–100

15 ft (5 m)

218–101

25 ft (8 m)

218–102

36 ft (11 m)

218–103

50 ft (15 m)

220–119

75 ft (23 m)

220–120

100 ft (30.5 m)

Air Filter & Moisture Separator 106–148

250 psi (17.5 bar) MAXIMUM WORKING PRESSURE For cleaning and drying air in air spray

system. 20 micron element, 5 oz. bowl capacity, 3/8 npt(f) inlet and outlet

High Volume Air Regulator 206–199

0–125 psi (0–9 bar) Regulated Pressure 200 psi (14 bar) Steel Pressure Gauge For regulating air to the gun.

1/2 npt(f) inlet and outlet

Air Shut-off Valve 224–754

150 psi (10 bar) MAXIMUM WORKING PRESSURE For turning air to gun off or on.

1/4 npsm(m) LH x 1/4 npsm(f) LH

Grounded Air Supply Hose

100 psi (7 bar) MAXIMUM WORKING PRESSURE 0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) LH;

Color coded gray; More flexible than black hose

PART NO.

LENGTH

223–068

6 ft (1.8 m)

223–069

15 ft (5 m)

223–070

25 ft (8 m)

223–071

36 ft (11 m)

223–072

50 ft (15 m)

223–073

75 ft (23 m)

223–074

100 ft (30.5 m)

Grounded Air Supply Hose

100 psi (7 bar) MAXIMUM WORKING PRESSURE 0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) LH;

Color coded red; Stainless steel braid ground path

PART NO.

LENGTH

235–068

6 ft (1.8 m)

235–069

15 ft (5 m)

235–070

25 ft (8 m)

235–071

36 ft (11 m)

235–072

50 ft (15 m)

235–073

75 ft (23 m)

235–074

100 ft (30.5 m)

Air Adapter Nipple 185–493

For connecting two or more grounded gun air supply hoses. 1/4 npt x 1/4 npsm (left hand thread)

 

Bleed-type Master Air Valve 107–141

300 psi (21 bar) MAXIMUM WORKING PRESSURE Relieves air trapped in the air line between the paint pump air motor and this valve when closed. 3/4 npt

Filter (Air or Paint) 202–271

750 psi (52 bar) MAXIMUM WORKING PRESSURE With 60 mesh (250 micron) element,

3/8 npt(f) inlet, 3/8 npt(m) outlet

Fluid Drain Valve

500 psi (35 bar) MAXIMUM WORKING PRESSURE For relieving fluid line pressure

208–6301/2 npt(m) x 3/8 npt(f); carbon steel and PTFE;for non-corrosive fluids

210–0713/8 npt(m) x 3/8 npt(f); stainless steel and PTFE;for corrosive fluids

Image 32
Contents Part No -224, Series a Air Spray Gun, without shroud Part No -893, Series aPart No -894, Series a Part No -094 Series a Gun ManifoldHazardous Fluid Hazard Hose SafetyEquipment Misuse Hazard Flushing and Cleaning Safety Ventilate the Spray BoothFIRE, EXPLOSION, or Electrostatic Shock Hazard GroundingTable of Contents Typical Installation Installing the SystemSystem Options Spraying Voltage MonitorInstallation Ventilate the Spray BoothInstall the Gun Mounting Bracket Install the Gun and Manifold See FigAccessories section Air Cap/Air Cap NutInstall the Fabric Cover See Fig Check the Electrical Grounding See FigOperating Checklist Adjusting the Spray PatternOperation Selecting a Fluid Nozzle and Air Cap Gun FunctionsMaintenance Adjusting the Turbine Air PressureDaily Care and Cleaning Activating the Voltage Select KV HI/LOClean the Air Cap and Fluid Nozzle Follow the Pressure Relief Procedure Warning onCheck for signs of fluid leakage where indicated by arrows Check for Fluid Leakage See FigSpray Pattern Troubleshooting Chart Problem Cause Solution Improper Spray PatternGUN Operation Troubleshooting Chart Problem Cause SolutionElectrical Troubleshooting Chart See Check the Electrical GroundingTest Power Supply Resistance See Fig Electrical TestsTest Gun Resistance See Fig 40dAir Cap/Nozzle/Resistor Stud Replacement Test Resistor Stud ResistanceFlush the Gun and Relieve Pressure ServiceService Notes Air Cap/Nozzle/Resistor Stud Replacement To install the resistor studElectrode Replacement Barrel Removal Barrel Installation Fluid Packing Rod Removal and Repair   Power Supply Removal and Replacement Power Supply AdjustmentTurbine Alternator Removal Replacement 40cSpray GUN Service Notes Manifold Service Notes Spray GUN Parts Drawing Detail aSpray GUN Parts List Part No -893, Series a Air Spray Gun, with standard shroudManifold Parts List Manifold Parts DrawingPRO 4600HC Conversion KIT Installing the PRO 4600HC Conversion KitSure Relief Procedure on Accessories Gun Mount Assembly Volt Power SupplyMount Extensions 224-255/259 Nylon Fabric CoverBulkhead Connector Grounding Clamp and WireFiber Optic Cables MegohmmeterTechnical Data Manual Change SummaryMINNEAPOLIS, MN Graco Warranty and DisclaimersGraco Phone Numbers

308-084, 4600SC, 224-094, 235-894, 235893 specifications

Graco Inc. is a renowned company in the manufacturing of fluid handling systems and products, particularly focusing on industrial, automotive, and contractors' markets. Among its extensive range of offerings are specific models that have garnered attention for their performance and reliability. This article highlights several Graco product numbers, including 224-224, 235893, 235-894, 224-094, and 4600SC.

The model 224-224 is recognized for its versatile usage in paint applications, capable of accommodating various material types. It is equipped with Graco's innovative technology that ensures consistent and precise fluid delivery, making it ideal for both professional contractors and DIY enthusiasts. The device often includes features like a lightweight structure for easy maneuverability and an ergonomic design for enhanced user comfort.

Moving to the model 235893, it presents impressive durability and optimal performance in high-pressure scenarios. This model is particularly popular among heavy-duty applications, thanks to its ability to withstand the rigors of demanding environments. With advanced component engineering, the 235893 ensures minimal downtime and enhances efficiency, making it a go-to choice for professionals in need of reliability under pressure.

The 235-894 model stands out due to its unique pump design that optimizes material flow and reduces overspray. This characteristic is crucial for achieving professional-grade finishes with reduced waste, saving both time and resources. Additionally, its user-friendly interface allows operators to adjust settings easily, catering to varied application needs.

Next, the 224-094 model is tailored for precision and versatility, featuring a compact design suitable for tighter spaces. It is engineered for efficiency, allowing for rapid color changes without compromising performance. The advanced filtration system integrated within this model ensures that contaminants are minimized, safeguarding the integrity of the materials being used.

Lastly, the 4600SC model exemplifies Graco’s commitment to innovation, specifically tailored for airless spray applications. It is equipped with cutting-edge technology that maximizes control over pressure and flow rate, allowing for seamless operation in different environments. The model’s ability to adapt to various paints and coatings while providing a superior finish adds to its appeal.

In summary, Graco Inc. provides a range of high-performance products like the 224-224, 235893, 235-894, 224-094, and 4600SC, each with distinctive features and technologies that cater to a broad spectrum of fluid handling needs. These models reflect the company’s dedication to enhancing efficiency, durability, and user experience in fluid management across various industries.