Graco Inc GC-1388G, Indy-X Chop important safety instructions Technical Data, Category Data

Page 23

Technical Data

	Category	Data
	Maximum Fluid Working Pressure	2000 psi (13.8 MPa, 138 bar)
	Maximum Air Inlet Pressure	100 psi (.69 MPa, 6.9 bar)
	Typical Flow Rate of Pattern Guns	Dependent of spray tip
	Maximum Fluid temperature	120° F (49° C)
	Air Inlet Size (Chopper)	1/4-18 NPS Male
	A Component (Catalyst) Inlet Size	1/4 in. Tube
	B Component (Resin) Inlet Size	1/4-18 NPS Male
	Solvent Flush	1/4-18 NPS Male
	Sound Pressure	40.39 dB(A)
	Sound Power, measured per ISO 94 16-2	56.2 dB(A)
	Dimensions	10.5 L X 2.75 W X 8.0 H (266.7 X 69.8 X 203.2 mm)
	Weight	2.70 Lbs.
	Wetted Parts	Aluminum, stainless steel, carbon steel, carbide,
	Wetted Parts	chemically resistant o-rings
		chemically resistant o-rings

GC-1388F

23

Image 23

Contents Indy-X Chop Contents Fire and Explosion Hazard Skin Injection Hazard Spraying and Lamination Operations Important Safety InformationMethyl Ethyl Ketone Peroxide Mekp Polyester Resins and Gel-CoatsGrounding Hose Attachment Set-UpPart Description Number PartsStandard Equipment Part DescriptionIndy X Chop Dispense Gun Assembly DrawingsAssembly Drawings Assembly Drawings Assembly Drawings Part Description Qty Number Indy X Chop Parts List Description QtyDaily Maintenance Pressure Relief ProcedureParts Replacement Procedure MaintenanceNeedle & Pin Removal Procedures Needle Test Needle & Pin Reassemble Procedure Trigger & Needle Guard Readjustment Procedure Packing Nut Adjustment Procedure Width Output lbs OptionsImpingement Dispense Tips Part Orifice Min Max Part Orifice Number Part OrificeCategory Data Technical DataGraco Ohio Information Graco Ohio Standard Warranty