Graco Inc GC-1388G, Indy-X Chop important safety instructions Fire and Explosion Hazard

Page 3

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure- specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

See Important Safety Information - MEKP, Polyester Resins and Gel-Coats and Spraying and Lamination Operations section of this manual.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

Use equipment only in well ventilated area.

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

Keep work area free of debris, including solvent, rags and gasoline.

Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

Ground all equipment in the work area. See Grounding instructions.

Use only grounded hoses.

Hold gun firmly to side of grounded pail when triggering into pail.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

Keep a working fire extinguisher in the work area.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

• Always wear impervious gloves when spraying or cleaning equipment.

GC-1388F

3

Image 3
Contents Indy-X Chop Contents Fire and Explosion Hazard Skin Injection Hazard Spraying and Lamination Operations Important Safety InformationMethyl Ethyl Ketone Peroxide Mekp Polyester Resins and Gel-CoatsGrounding Hose Attachment Set-UpPart Description Number PartsStandard Equipment Part DescriptionIndy X Chop Dispense Gun Assembly DrawingsAssembly Drawings Assembly Drawings Assembly Drawings Part Description Qty Number Indy X Chop Parts List Description QtyDaily Maintenance Pressure Relief ProcedureParts Replacement Procedure MaintenanceNeedle & Pin Removal Procedures Needle Test Needle & Pin Reassemble Procedure Trigger & Needle Guard Readjustment Procedure Packing Nut Adjustment Procedure Options Impingement Dispense Tips Part Orifice Min MaxWidth Output lbs Part Orifice Number Part OrificeCategory Data Technical DataGraco Ohio Information Graco Ohio Standard Warranty