Accessories
Internal Mix Gel - Bolt-On AAC Gun Head Kit (23560-00)
| | | Part | Description |
| | | Number |
| | | |
| | | 23562-00 | DUAL AIR ASSIST BODY |
| | | 23563-00 | AIR ASSIST NEEDLE |
| Part | Description | 23564-00 | AIR ASSIST SEAL |
| Number | 23565-00 | AIR ASSIST RING |
| |
| 103C02 | SET SCREW | 23566-00 | RETAINING RING |
| 13867-03 | O-RING | 23573-00 | RING INSERT |
| 13867-64 | O-RING | 23721-01 | WASHER |
| 21464-00 | ELBOW FITTING | 8212-16F | SCREW |
| 21523-90 | SPIRAL MIXING ELEMENT | 8212-48F | SCREW |
| 23561-00 | AIR ASSIST ADAPTER | LPA2-147-XXXX | SPRAY TIP |
The following is not included in this kit, but required:
(1) 7834-07 Elbow Fitting (Connection To Air Manifold)
XX-9704-53 Black AAC Tubing (XX= YOU MUST SPECIFY TUBING LENGTH BY FEET) EXAMPLE: If standard machine hose length is 25ft, it is recomended to order 28ft. of 9704-53.
Required: qty. (1) 7716-06C set screw.
Remove: 23765-00 Chopper mounting assembly and place 7716-06C set screw in middle tapped hole - (USE THREAD LOCKER MEDIUM STRENGTH TO KEEP FROM LEAKING)
Reason: To remove extra weight and bulk from the gun, for gelcoat application.
Delete: qty. (4) 8212-48F shoulder screw, Keep and use existing 8212-32F shoulder screws.