Graco Inc GC-1387J important safety instructions Formula Gun

Page 1

Operation

Formula Gun

GC-1387J

ENG

Low emission internal-mix dispense gun for use with polyester resin and gel coat.

For professional use only.

Maximum fluid working pressure: 2000 psi (14 MPa, 138 bar)

Maximum air pressure: 100 psi (0.7 MPa, 7 bar)

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

Image 1

Contents Formula Gun Contents Fire and Explosion Hazard Skin Injection Hazard Polyester Resins and Gel-Coats Methyl Ethyl Ketone Peroxide MekpSpraying and Lamination Operations Grounding Hose Attachment Set-UpOvernight Shut Down Procedure Formula Dispense Gun Part Description Number PartsRepair Kits Part Description NumberFormula Dispense Gun 72123-40 Part Description Qty GC-1387H Daily Maintenance Pressure Relief ProcedureParts Replacement Procedure Formula Gun MaintenanceRing Chart Material Valve Assembly Procedure Min Max AccessoriesWidth Output lbs Part Orifice Number LPA2-147-6225 062 6240 6250 6265 7240 072 7250 7840 078 Small Diameter Airless Or Non Atomized Material Tip Internal Mix Gel Screw-On AAC Gun Head Kit Part Description AssyDual AIR Assist Body High Volume / High Filled Resin Part Description Number Category Data Technical DataGC-1387H Graco Ohio Information Graco Ohio Standard Warranty