Troubleshooting
PROBLEM | CAUSE | REMEDY | |
|
|
| |
| - Paint too diluted | - Add undiluted product | |
Paint drips on the | - Improper spray adjustment | - Reduce paint flow by tightening Fluid Control Knob (2) | |
object being | - Too much air flow | - Reduct air flow by turning Air Valve Assy (15) to minus | |
painted | - Holding Trigger (4) too long | - Release Trigger on back stroke | |
| - Spraying too close | - Increase distance between nozzle and object | |
|
|
| |
| - Paint too diluted | - Add undiluted product | |
| - Improper spray adjustment | - Increase paint flow by loosening Fluid Control Knob (2) | |
Paint application | - Air flow too weak | - Increase air flow by turning Air Valve Assy (15) to plus (+). | |
weak or irregular | - Spray movement too fast | - Move Spray Gun more slowly | |
| - Gun clogged | - Clean components are previously described | |
| - Spray distance too far | - Spray closer to object | |
|
|
| |
| - Paint not thinned enough | - Add thinner (check viscosity) | |
Spray Gun not | - Spray Gun clogged | - Clean components as previously described | |
- Air Hose is leaking | - Replace Air Hose | ||
operating | |||
- Air Filter clogged | - Clean or replace Air Filter | ||
| |||
| - Paint Cup not fully closed | - Tighten Plastic Cup and Cover. Check Material Sleeve (8). | |
|
|
|
SKU 43430 | Page 8 |