Unigreen CAMPO 11 - 16 - 22 - 32 manual Preliminary Checks, Transporting and Moving the Machine

Page 9

4.2PRELIMINARY CHECKS

When you receive the machine, check that it is complete and no parts are missing.

If there are any damaged parts, inform your local reseller or UNIGREEN directly in good time.

When the machine is delivered, make sure you ask:

a)that the machine is delivered with all of its parts fitted and that the fitting meets the requisites in table N° 12a page 29. (This procedure is necessary because for reasons of space during transportation the machine is often delivered partially dismantled).

b)that it is tested in your presence in particular checking:

=that the suction filter and the inside of the tank are clean and free of work residues.

=that the connections are made correctly following the basic layout (FIG. N° 11).

=that the hose clips and all the unions and connections are tightened properly.

=that any herbicide boom is mounted in the centre.

=that all of the protective covers are fitted solidly to the machine, in particular the protective cover of the power-takeoff of the pump.

4.3TRANSPORTING AND MOVING THE MACHINE

Every time you have to lift the machine, before starting the operation, always make sure the lifting gear and the relevant tools and equipment (cables, hooks, etc..) are suitable for lifting the load and check the stability of the same.

The dry weight of the machine at the maximum level of fitting and with all the accessories allowed is stamped on the nameplate; use slings and lifting gear with a adequate load-bearing capacity.

Don’t stand the sprayer on soft ground or steep slopes.

Never lift or move the sprayers by hand if there is liquid in the tank. The machine will weigh more and the movement of the liquid can change the centre of gravity causing uncontrolled movements.

We recommend using slings as shown in the figure, the lifting points to use on the machine are indicated with the relevant symbol.

Don’t lift the machine with the forks of a forklift truck because the machine can tip over due to the overhanging weight of the booms.

Don’t pass or stand under the machine when it is being lifted.

4.3.1 TOWED SPRAYERS

The towed sprayers have a folding parking wheel so the machine can be moved around by hand on flat, compact ground, with the tank empty. In general the use of the relevant chocks is necessary (supplied with the machine and positioned on the two sides of the same, as shown in the figure to the side) to guarantee the stability of the machine.

To lift the machine, follow the instructions above.

This symbol identifies the coupling points of the machine

Hinged parking wheel

unigreen 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 09/2006 USE and Maintenance ManualSummary PROBLEMS, Causes and Solutions Composition of the Manual GuaranteeImproper use Product Responsibility Unigreen spa is not responsible ifKey to the symbols Intended USE Using Chemical ProductsProhibited USE RecommendationsCharacteristics and Specifications Machines Designed to be Used only with Clean WaterWeather Conditions Driving on the RoadStandards of Reference Noise Level of the MachineUSER’S Instructions Description of the Machine Hand WashingtanksPreliminary Checks Transporting and Moving the MachineTowed Sprayers Tractor Coupling Hydraulic Connection to the DistributorsCardan Shaft Suction Filter PumpComponents of the Pressure Regulator Pressure RegulatorControl box for Ergo and Remo electrical regulators General InstructionsSpraying Computer Optional Mixing Filling the TankManual Premixing Premixer on Cover OptionalMax 15 Bar TOP-MIX Premixer Version Optional Washing the SprayerCircuit Washer Andtank Washer OIL Feed from Tractor Indipendent Hydraulic PlantAIR-ASSISTED Booms SELF-LEVELING DevicesVariable Geometry Description of Type of Nozzles LiftingFan nozzles Anti-drift nozzles=600xQ Useful InformationProgrammed Maintenance TAB. N MaintenanceMarker Hand LancesExtraordinary Maintenance Routine MaintenanceRepairs Storage in a Warehouse and TransportationDemolition and Disposal Putting Back Into Service After Winter LayupMaterials for Demolition Electrical and Electronic Apparatus Waste EeawArancio Orange Verde Green Giallo Yellow BLU Blue Rosso RED TAB.1 Characteristics Nozzles ISORosso RED Marrone Brown TAB.2 Characteristics Nozzles Conical ISOTAB.4-5 Capacity Hand Lances TAB.5-6 Spraying Tables 2500Table of Programmed Maintenance Operation PROBLEMS, Causes and Solutions50 h 300 h TAB a TAB.12A Allowed FittingsTAB.12B Allowed Fittings TAB bIL Polietilene Rotazionale Member of the group
Related manuals
Manual 36 pages 31.8 Kb

CAMPO 11 - 16 - 22 - 32, DSP 11 - 16 - 22 - 32 specifications

Unigreen DSP Series and CAMPO Series are advanced agricultural sprayers designed to meet the evolving needs of modern farming. The Unigreen DSP (Dynamic Spraying Product) models 11, 16, 22, and 32, along with the CAMPO models of the same specifications, are engineered for efficiency, precision, and reliability in crop protection.

One of the key features of the Unigreen DSP models is their innovative spraying technology. Each model is equipped with a high-capacity tank that allows for extended operation without the need for frequent refills. The DSP series incorporates adjustable booms that provide precise application across various crop types. This ensures uniform coverage and minimizes waste, making it an environmentally friendly option for farmers.

The CAMPO series also boasts similar tank capacities and boom adjustments, making them suitable for diverse agricultural applications. Both series offer customizable options, allowing farmers to choose the configuration that best fits their land and crop requirements.

Another standout characteristic of both Unigreen and CAMPO sprayers is their user-friendly interface. Equipped with advanced electronic controls, farmers can easily monitor and adjust spray rates, pressure, and other critical parameters in real time. This technology not only enhances the sprayers' operational efficiency but also aids in achieving the optimum application rates for different pesticides and fertilizers.

Furthermore, both series integrate cutting-edge GPS technology, enabling precision agriculture practices. This feature allows operators to map their fields, ensuring that every inch is accurately treated, while also reducing the possibility of overlap or missed areas. This precision application reduces chemical usage and ultimately leads to cost savings.

Durability is another primary focus in the design of the Unigreen DSP and CAMPO sprayers. Built with high-quality materials that can withstand harsh environmental conditions, these sprayers promise longevity and consistent performance over time.

In summary, Unigreen DSP and CAMPO models 11, 16, 22, and 32 are technologically advanced agricultural sprayers that combine efficiency, precision, and durability. With features such as adjustable booms, advanced electronic controls, and GPS technology, they cater to the diverse needs of today’s farmers, helping to enhance productivity while minimizing environmental impact. These sprayers are positioned to play a pivotal role in the future of sustainable agriculture.
Top Page Image Contents