Unigreen DSP 11 - 16 - 22 - 32 manual Noise Level of the Machine, Standards of Reference

Page 8

This symbol identifies the clean water tank on the machine used to wash your hands

8unigreen

3.2NOISE LEVEL OF THE MACHINE

Use earmuffs to protect your ears when using the machine,

Sprayers that are equipped with just a pump and hydraulic plant ACOUSTIC POWER LEVEL emitted by the machine: 106,0 dBA ACOUSTIC PRESSURE LEVEL AT THE OPERATOR’S POSITION emitted by the machine: 91,4 dBA

Sprayers that are equipped of air sleeve (VENTO)

ACOUSTIC POWER LEVEL emitted by the machine with impeller Vento: 114,8 dBA

ACOUSTIC PRESSURE LEVEL AT THE OPERATOR’S POSITION emitted by the machine with impeller Vento: 97,6 dBA

Readings taken in accordance with the following standards: Machines Directive 98/37/CE (89/392 CE Dir. re-codified).

Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors. Legislative Decree D.Lgs. 277/91 on the subject of the protection of workers against the risks deriving from exposure to chemical, physical and biological agents.

3.3STANDARDS OF REFERENCE:

-MACHINES DIRECTIVE 98/37/CEE (89/392 CE Dir. re-codified).

-Directive 86/188/CEE: risks deriving from exposure to noise (implemented in Italy by Legislative Decree D.L 277/1991)

-DPR 547/1955: Regulations for the prevention of accidents and hygiene at work.

-Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors. -UNI EN ISO 12100-1/Apr.2005 : Machinery safety - Fundamental concepts, general design principles - Part 1: basic terminology, methodology

-UNI EN ISO 12100-2/Apr.2005 : Machinery safety - Fundamental concepts,

general design principles - Part 2: Technical principles

-UNI EN 294/July 1993: Machinery safety, safe distances to avoid reaching hazardous areas with upper limbs.

-UNI EN 349/June 1994: Machinery safety, minimum spaces to prevent crushing of body parts

-UNI EN 907/Nov.1998: Agricultural and forestry machinery - Sprayers and spreaders of liquid fertilizers - Safety.

-UNI EN 954-1/Dec. 1998 : Machinery safety - Fundamental concepts, general design principles

-UNI EN 982/July 1997: Machinery safety. Safety requisites relevant to systems and their components for hydraulic and pneumatic transmissions. Hydraulics. -UNI EN ISO 4254-1/June 2006: Agricultural machines - Safety - Part 1: General requisites

-ISO 11684/1995: Pictograms - general principles.

4USER’S INSTRUCTIONS

4.1DESCRIPTION OF THE MACHINE

The sprayers are made of a structural steel frame and a polyester tank reinforced with fibreglass or high-density polyethylene.

The frame is painted with special fired epoxy paints or, depending on the versions, hot galvanised. The tank is easy to empty and this makes it possible to use the machine even on hillsides.

The pumps are generally diaphragm pumps but in some cases fitted with pistons.

The accessories that can be used to complete the sprayer include: lifting devices, self-levelling devices, mechanical or hydraulic herbicide booms, jets and nozzles and this makes the UNIGREEN sprayer a highly qualified and efficient piece of equipment.

4.1.1 HAND WASHINGTANKS

The sprayers are supplied with an auxiliary hand-washing tank with clean water and a hand tap.

This tank must always be supplied with water and the inside must be clean so you can wash any parts of the body that come into contact with the chemical product used.

Never drink the liquid inside.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents USE and Maintenance Manual 09/2006Summary PROBLEMS, Causes and Solutions Guarantee Composition of the ManualImproper use Product Responsibility Unigreen spa is not responsible ifKey to the symbols Using Chemical Products Intended USEProhibited USE RecommendationsMachines Designed to be Used only with Clean Water Characteristics and SpecificationsWeather Conditions Driving on the RoadNoise Level of the Machine Standards of ReferenceUSER’S Instructions Description of the Machine Hand WashingtanksTowed Sprayers Preliminary ChecksTransporting and Moving the Machine Cardan Shaft Tractor CouplingHydraulic Connection to the Distributors Pump Suction FilterPressure Regulator Components of the Pressure RegulatorControl box for Ergo and Remo electrical regulators General InstructionsSpraying Computer Optional Filling the Tank MixingMax 15 Bar Manual PremixingPremixer on Cover Optional Circuit Washer Andtank Washer TOP-MIX Premixer Version OptionalWashing the Sprayer Indipendent Hydraulic Plant OIL Feed from TractorVariable Geometry AIR-ASSISTED BoomsSELF-LEVELING Devices Lifting Description of Type of NozzlesFan nozzles Anti-drift nozzlesUseful Information =600xQMaintenance Programmed Maintenance TAB. NMarker Hand LancesRoutine Maintenance Extraordinary MaintenanceRepairs Storage in a Warehouse and TransportationPutting Back Into Service After Winter Layup Demolition and DisposalMaterials for Demolition Electrical and Electronic Apparatus Waste EeawTAB.1 Characteristics Nozzles ISO Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso REDTAB.2 Characteristics Nozzles Conical ISO Rosso RED Marrone BrownTAB.4-5 Capacity Hand Lances 2500 TAB.5-6 Spraying Tables50 h 300 h Table of Programmed Maintenance OperationPROBLEMS, Causes and Solutions TAB.12A Allowed Fittings TAB aTAB b TAB.12B Allowed FittingsIL Polietilene Rotazionale Member of the group
Related manuals
Manual 36 pages 31.8 Kb

CAMPO 11 - 16 - 22 - 32, DSP 11 - 16 - 22 - 32 specifications

Unigreen DSP Series and CAMPO Series are advanced agricultural sprayers designed to meet the evolving needs of modern farming. The Unigreen DSP (Dynamic Spraying Product) models 11, 16, 22, and 32, along with the CAMPO models of the same specifications, are engineered for efficiency, precision, and reliability in crop protection.

One of the key features of the Unigreen DSP models is their innovative spraying technology. Each model is equipped with a high-capacity tank that allows for extended operation without the need for frequent refills. The DSP series incorporates adjustable booms that provide precise application across various crop types. This ensures uniform coverage and minimizes waste, making it an environmentally friendly option for farmers.

The CAMPO series also boasts similar tank capacities and boom adjustments, making them suitable for diverse agricultural applications. Both series offer customizable options, allowing farmers to choose the configuration that best fits their land and crop requirements.

Another standout characteristic of both Unigreen and CAMPO sprayers is their user-friendly interface. Equipped with advanced electronic controls, farmers can easily monitor and adjust spray rates, pressure, and other critical parameters in real time. This technology not only enhances the sprayers' operational efficiency but also aids in achieving the optimum application rates for different pesticides and fertilizers.

Furthermore, both series integrate cutting-edge GPS technology, enabling precision agriculture practices. This feature allows operators to map their fields, ensuring that every inch is accurately treated, while also reducing the possibility of overlap or missed areas. This precision application reduces chemical usage and ultimately leads to cost savings.

Durability is another primary focus in the design of the Unigreen DSP and CAMPO sprayers. Built with high-quality materials that can withstand harsh environmental conditions, these sprayers promise longevity and consistent performance over time.

In summary, Unigreen DSP and CAMPO models 11, 16, 22, and 32 are technologically advanced agricultural sprayers that combine efficiency, precision, and durability. With features such as adjustable booms, advanced electronic controls, and GPS technology, they cater to the diverse needs of today’s farmers, helping to enhance productivity while minimizing environmental impact. These sprayers are positioned to play a pivotal role in the future of sustainable agriculture.
Top Page Image Contents