Unigreen DSP 11 - 16 - 22 - 32 manual TOP-MIX Premixer Version Optional, Washing the Sprayer

Page 16

M

TOP-MIX 40

4.12.4 TOP-MIX PREMIXER VERSION (OPTIONAL)

The premixer for this version lets you adjust the pressure independently, avoiding having to change the work settings of the machine every time you have to do the premixing.

The differences with the FULL-MIX version described previously regard the pressure regulator valve (with knob M and manometer) installed on the premixer and a 3-way deviator tap installed on the machine that deviates the delivery of the pump to the premix or the pressure regulator of the Campo. To use the TOP-MIX version proceed as follows:

a)turn the lever of the delivery deviator to the TOP-MIX position as shown in the pictogram on the machine.

b)adjust the pressure of the Top-Mix to roughly 10-12 bar with knob M (the manometer lets you check the actual pressure)

c)for mixing and washing the tin, proceed as indicated in the previous paragraph relevant to the FULL-MIX

NB: At the end of all of the operations put the lever of the deviator back into the work position.

This symbol identifies the clean water tank on the machine used to wash the circuit

1

3

2

FIG. N°11

 

B

D

 

A

C

 

Deviatore di aspirazione

4.13 WASHING THE SPRAYER

Thoroughly wash the machine after each treatment pumping clean water through the circuit and clean the suction and delivery filters.

Warning: Dirty equipment is very dangerous for the people and environment. Discharging the residues of washing in the environment without taking precautions is forbidden as this pollutes watercourses. Distribute the residues on the treated field.

WARNING: The tank washing is controlled by tap N. 1, premix N. 2 and stirrer N. 3.

4.13.1 CIRCUIT WASHER ANDTANK WASHER

Some machine models are fitted with a circuit washer tank (FIG.11). This tank must be filled with clean water and used to rinse the entire circuit including the suction, delivery, pump, pressure regulator, jets and nozzles. Thanks to the practical rotary nozzle it also rinses the inside surfaces of the tank.

NB: To completely clean the tank and the pipes of any residues of the various active principles, we recommend adding 2kg of soda to the washing liquid for every 100 L of water.

At the end of the treatment, wash the circuit and the tank.

a)Stop the diaphragm pump disengaging the power-takeoff.

b)Check you have filled the circuit washer tank (C).

c)Make sure the main control of the pressure regulator is OFF and that all the boom sectors are closed.

d)Turn suction deviator A to the circuit washer position (H2O).

e)Start the diaphragm pump by engaging the power-takeoff.

f)Increase the engine speed until all of the liquid in circuit washer tank C has been sucked up.

g)Turn the diaphragm pump off and turn deviator A to the work position (TANK).

h)Turn the main control to ON, so there is pressure in the circuit.

i)Start the diaphragm pump again and use the tank washing tap on the regulator (or on pump) that supplies jet B.

j)After a few minutes you can close the tank washing tap

k)Distribute the washing residues over a portion of the field where it won’t cause damage.

l)After you have finished washing, stop the diaphragm pump.

NB: at the end of the washing cycle, if there is the risk of frost, pour roughly 500 grams of normal antifreeze for auto vehicles into the tank.

16unigreen

Page 15 Page 17
Image 16
Page 15 Page 17
Contents USE and Maintenance Manual 09/2006Summary PROBLEMS, Causes and Solutions Guarantee Composition of the ManualImproper use Product Responsibility Unigreen spa is not responsible ifKey to the symbols Using Chemical Products Intended USEProhibited USE RecommendationsMachines Designed to be Used only with Clean Water Characteristics and SpecificationsWeather Conditions Driving on the RoadNoise Level of the Machine Standards of ReferenceUSER’S Instructions Description of the Machine Hand WashingtanksTransporting and Moving the Machine Preliminary ChecksTowed Sprayers Hydraulic Connection to the Distributors Tractor CouplingCardan Shaft Pump Suction FilterPressure Regulator Components of the Pressure RegulatorControl box for Ergo and Remo electrical regulators General InstructionsSpraying Computer Optional Filling the Tank MixingPremixer on Cover Optional Manual PremixingMax 15 Bar Washing the Sprayer TOP-MIX Premixer Version OptionalCircuit Washer Andtank Washer Indipendent Hydraulic Plant OIL Feed from TractorSELF-LEVELING Devices AIR-ASSISTED BoomsVariable Geometry Lifting Description of Type of NozzlesFan nozzles Anti-drift nozzlesUseful Information =600xQMaintenance Programmed Maintenance TAB. NMarker Hand LancesRoutine Maintenance Extraordinary MaintenanceRepairs Storage in a Warehouse and TransportationPutting Back Into Service After Winter Layup Demolition and DisposalMaterials for Demolition Electrical and Electronic Apparatus Waste EeawTAB.1 Characteristics Nozzles ISO Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso REDTAB.2 Characteristics Nozzles Conical ISO Rosso RED Marrone BrownTAB.4-5 Capacity Hand Lances 2500 TAB.5-6 Spraying TablesPROBLEMS, Causes and Solutions Table of Programmed Maintenance Operation50 h 300 h TAB.12A Allowed Fittings TAB aTAB b TAB.12B Allowed FittingsIL Polietilene Rotazionale Member of the group
Related manuals
Manual 36 pages 31.8 Kb

CAMPO 11 - 16 - 22 - 32, DSP 11 - 16 - 22 - 32 specifications

Unigreen DSP Series and CAMPO Series are advanced agricultural sprayers designed to meet the evolving needs of modern farming. The Unigreen DSP (Dynamic Spraying Product) models 11, 16, 22, and 32, along with the CAMPO models of the same specifications, are engineered for efficiency, precision, and reliability in crop protection.

One of the key features of the Unigreen DSP models is their innovative spraying technology. Each model is equipped with a high-capacity tank that allows for extended operation without the need for frequent refills. The DSP series incorporates adjustable booms that provide precise application across various crop types. This ensures uniform coverage and minimizes waste, making it an environmentally friendly option for farmers.

The CAMPO series also boasts similar tank capacities and boom adjustments, making them suitable for diverse agricultural applications. Both series offer customizable options, allowing farmers to choose the configuration that best fits their land and crop requirements.

Another standout characteristic of both Unigreen and CAMPO sprayers is their user-friendly interface. Equipped with advanced electronic controls, farmers can easily monitor and adjust spray rates, pressure, and other critical parameters in real time. This technology not only enhances the sprayers' operational efficiency but also aids in achieving the optimum application rates for different pesticides and fertilizers.

Furthermore, both series integrate cutting-edge GPS technology, enabling precision agriculture practices. This feature allows operators to map their fields, ensuring that every inch is accurately treated, while also reducing the possibility of overlap or missed areas. This precision application reduces chemical usage and ultimately leads to cost savings.

Durability is another primary focus in the design of the Unigreen DSP and CAMPO sprayers. Built with high-quality materials that can withstand harsh environmental conditions, these sprayers promise longevity and consistent performance over time.

In summary, Unigreen DSP and CAMPO models 11, 16, 22, and 32 are technologically advanced agricultural sprayers that combine efficiency, precision, and durability. With features such as adjustable booms, advanced electronic controls, and GPS technology, they cater to the diverse needs of today’s farmers, helping to enhance productivity while minimizing environmental impact. These sprayers are positioned to play a pivotal role in the future of sustainable agriculture.
Top Page Image Contents