Global Machinery Company DP21 instruction manual Contents

Page 2

Contents

Warranty

2

 

 

Introduction

3

 

 

Environmental protection

3

 

 

Description of symbols

3

 

 

Specifications

3

 

 

Safety instructions

4

 

 

Additional safety rules for drill presses

5

 

 

Know your product

7

 

 

Accessories

8

 

 

Unpacking

8

 

 

Assembly

8

 

 

Adjusting the table height

10

 

 

Adjusting the table angle

10

 

 

Installing and removing drill bits

11

 

 

Setting the drilling depth

11

 

 

Changing the speed

11

 

 

Turning on and off

12

 

 

Operation

12

 

 

Maintenance and repair

13

 

 

Warranty Power Tools

Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service department.

The product is warranted for a 2-year repair warranty for home domestic use from the date of original purchase. If found to be defective in materials or workmanship, the tool will be repaired free of charge.

A small freight charge may apply. Proof of purchase is essential. We reserve the right to reject any claim where the purchase cannot be verified.

This warranty does not include damage or defects to the tool caused by or resulting from abuse, accidents, alterations or commercial or business use. It also does not cover any bonus items or included accessories. Only the power tool is covered under this warranty.

With continuing product development, changes may have occurred which render the product received slightly different to that shown in this instruction manual.

Please ensure that you store your receipt in a safe place.

Conditions apply to the above warranty. For full details of the warranty terms and conditions please refer to our website – www.gmcompany.com

For prompt service we suggest you log your service request online - www.gmcservice.com.au, should you not have access to the internet, please contact our service department on 1300 880 001 (Australia)

or 0800 445 721 (New Zealand).

2

Image 2
Contents 250W Contents Introduction Description of symbolsSpecifications Environmental protectionSafety Instructions General safety instructions Additional safety rules for drill presses Page Know your product Unpacking AccessoriesAssembly 2500 RPM 1900 RPM 1400 RPM 890 RPM Adjusting the table height Adjusting the table angleChanging the speed Installing and removing drill bitsSetting the drilling depth Turning on and off Maintenance and repair Wood drillingPage Page GMC customer assist