Lift the head assembly (13) and slide it onto the column assembly (5) as far as possible.
Align the head assembly with the table assembly (10) and base (8). Using the hex key (18) tighten the head lock set screw (3) into the head assembly. This will secure the head onto the column.
Screw the feed handles (4) into the threaded holes of the feed wheel hub (19) and tighten.
Clean the spindle nose of the chuck (11) with a clean cloth. Push the chuck up into the spindle nose as far as possible. Lightly tap the nose of the chuck with a piece of wood to ensure
proper fitting of the chuck on the spindle lock.
Fit the collar stop (15) over the quill (22). Place the collar nut
(17)into the designated position of the collar stop and in the other of side of the collar stop feed the collar screw (16) in and tighten into the collar nut.
Insert the depth scale (12) into the depth collar stop (15) and fit into the depth collar and place the depth scale nut (20) onto the end of the depth scale.
2500 RPM
1900 RPM
1400 RPM
890 RPM
500 RPM
Open the pulley cover to discover the motor speed pulleys and belt. Refer to the inside of the pulley cover for speed reference.
9