Global Machinery Company BN18SB manual

c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair personnel using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

Additional safety rules for drills

Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.

Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

•If possible, always use clamps or a vice to hold your work.

•Always switch off before you put the drill down.

•Ensure that the lighting is adequate.

•Do not put pressure on the drill, such that it slows the motor down. Allow the drill bit to cut without pressure. You will get better results and you will be taking better care of your tool.

•Keep the area free of tripping hazards.

•Do not let anyone under 18 years operate this tool.

•Only use accessory bits in good condition.

•Before drilling, check that there is sufficient clearance for the drill bit under the workpiece.

•Do not touch the bit after operation. It will be very hot.

•Keep your hands away from under the workpiece.

•Never use your hands to remove sawdust, chips or waste close by the bit.

•Rags, cloths, cord, string and the like should never be left around the work area.

•Support the work properly.

•If you are interrupted when operating the drill, complete the process and switch off before looking up.

•Periodically check that all nuts, bolts and other fixings are properly tightened.

•When using the drill, use safety equipment including safety glasses or shield, ear defenders, and protective clothing including safety gloves. Wear a dust mask if the drilling operation creates dust.

If in doubt, do not plug in the tool. Using a power source with a voltage less than the nameplate rating is harmful to the motor.

The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons

BN18SB specifications

Global Machinery Company BN18SB is a leading name in the heavy machinery sector, recognized for its commitment to innovation, efficiency, and performance. This robust machine is primarily designed for construction, mining, and industrial applications, reflecting Global Machinery's dedication to meeting the diverse needs of its clientele.

One of the standout features of the BN18SB is its exceptional power-to-weight ratio, which allows it to deliver outstanding performance while maintaining a manageable weight for ease of transport and operation. The machine is equipped with a high-performance engine that not only provides substantial horsepower but also emphasizes fuel efficiency. This aspect is crucial for contractors looking to manage operational costs without compromising on productivity.

The BN18SB incorporates advanced hydraulic systems, enhancing its lifting and digging capabilities. This technology ensures precise control, allowing operators to execute tasks with greater accuracy and speed. The hydraulic system is designed for robustness, minimizing downtime and maintenance requirements, which is a decisive factor for businesses aiming to maximize their operational uptime.

In addition to its power and efficiency, the Global Machinery BN18SB is built with operator comfort in mind. The spacious cabin is ergonomically designed, featuring intuitive controls that allow for seamless operation. Enhanced visibility from the cabin and sufficient noise reduction are also key characteristics, reducing operator fatigue during long work hours.

Safety is paramount in the design of the BN18SB. It is equipped with state-of-the-art safety features including an automatic shutdown system, rollover protection, and advanced stability management. These features not only protect the operator but also ensure compliance with international safety standards.

The machine's versatility is another significant advantage. It can be equipped with a variety of attachments, allowing it to perform multiple functions such as excavation, grading, and material handling. This adaptability makes it a valuable asset in any fleet, enhancing its utility across various types of projects.

In conclusion, the Global Machinery Company BN18SB stands out as a powerhouse in the heavy machinery industry, combining performance, efficiency, and safety. With its advanced technology, ergonomic design, and versatile capabilities, the BN18SB is an ideal choice for contractors and businesses seeking reliable and high-performing machinery for their projects. This machine not only represents the pinnacle of engineering excellence but also encapsulates Global Machinery's commitment to providing solutions that drive productivity and success in diverse industrial applications.