Global Machinery Company BN18SB instruction manual Additional safety instructions for the charger

Page 6

who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards.

Children and frail people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from

such changes.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction

and design:

Damage to the lungs if an effective dust mask is not worn.

Damage to hearing if effective ear defenders are not worn.

The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:

Damage to the lungs if an effective dust mask is not worn.

Damage to hearing if effective earmuffs are not worn.

Additional safety instructions for the charger

Before using the charger, read all the instructions and cautionary markings on the charger and battery pack as well as the instructions on using the battery pack.

Only charge your batteries indoors as the charger is designed for indoor use only.

DANGER. If the battery pack is cracked or damaged in any other way, do not insert it in the charger. There is a danger of electric shock or electrocution.

WARNING. Do not allow any liquid to come into contact with the charger. There is a danger of electric shock.

To allow the battery pack to cool down after charging, do not place it in a hot environment such as a metal shed or open trailer left in the sun.

The charger is not intended for any use other than charging the exact type of rechargeable battery pack as supplied with the charger. Any other use may result in the risk of fire, electric shock or electrocution.

The charger and battery packs supplied with it are specifically designed to work together. Do not attempt to charge the battery pack with any other charger than the one supplied.

Do not place any object on top of the charger as it could cause overheating. Do not place the charger near any heat source.

Do not pull on the lead of the charger to disconnect it from the power source.

Make sure that the charger cable is positioned where it will not be stepped on, tripped over or otherwise subjected to damage or stress.

Do not use an extension cord unless it is absolutely necessary. The use of an improper extension cord could cause the risk of fire, electric shock or electrocution.

Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise damaged in any way. Take the charger to an authorised service centre for a check or repair.

Do not disassemble the charger. Take it to an authorised service centre when service or repair is required. Incorrect re-assembly may result in the risk of fire, electric shock or electrocution.

6

Image 6
Contents 18V Cordless DRILL/DRIVER Contents Introduction Description of symbols Specifications Environmental protectionSafety instructions Do not expose power tools to rain or wet conditionsAdditional safety rules for drills Additional safety instructions for the charger Know your product To obtain the best life for the battery Fitting and removing the battery packBattery charging Using the drillAdjustable side handle Forward/reverse switchAdjustable torque Inserting and removing bitsChuck replacement MaintenanceDrilling Page GMC customer assist