Global Machinery Company BN18SB Fitting and removing the battery pack, Battery charging

Page 8

Fitting and removing the battery pack

To remove the battery pack from the drill firmly press the battery release tabs (7) at either side of the battery pack, and slide the battery backward out of the tool.

To install the battery pack, align rails, on the tool with the tabs on the battery pack and

slide the battery pack on to the drill. Ensure the battery pack is sitting straight on the foot and correctly entering the runners. The battery should slide fully on to the drill foot until the battery pack “clicks” into position.

Battery charging

IMPORTANT. Before plugging in the power supply from the charger to the slim line adaptor always ensure that the plug is switched off at the mains.

IMPORTANT. The battery will be fully charged after

3-5 hours, remove it from the adaptor after this time.

Do not leave a battery charging for longer than 24 hours.

1.Align and slide the slim line adaptor (10) onto the battery until the battery pack latches “click” into position. Check the adaptor is flush with the battery and there is a firm connection.

2.Connect the power supply from the charger (9) to the slim line adaptor via the socket in the rear of the adaptor housing.

3.Plug in the charger and switch on. The red LED indicator will show power to the adaptor and that charging is taking place.

4.The battery charging time is approximately 3–5 hours. The red LED goes out when the charging cycle is complete. Turn off the charger power supply from the mains and then remove the battery from the adaptor.

Note. The LED will continue to come on and off periodically after the battery is fully charged.

WARNING. Only use charger 1835C with the adaptor that is supplied for the BN18SB.

To obtain the best life for the battery

Never allow the drill to come to a complete stand still before recharging. The battery should be placed on charge whenever the battery is noticeably running down or the drill no longer performs a task it previously performed.

Avoid conducting short charges. Make sure that the battery is fully charged every time by allowing the charger to complete its full charging cycle.

Avoid allowing lose items like screws or nails etc. to be stored with battery packs as these or similar items can short battery packs and cause a fire or explosion.

Always unplug the charger when not in use and store in a dry secure place.

Avoid charging or storing your battery in temperatures below 0ºC and above 40ºC.

Using the drill

Use the forward/reverse switch

(4)to select the direction of rotation, then pull the trigger

(3).This trigger switch is an

electronic variable speed control which enables the user to

vary the speed continuously. The speed varies according to how far the trigger switch is depressed, the further it is depressed the faster the chuck will rotate and the lighter it is depressed, the slower it will rotate.

8

Image 8
Contents 18V Cordless DRILL/DRIVER Contents Description of symbols SpecificationsIntroduction Environmental protectionSafety instructions Do not expose power tools to rain or wet conditionsAdditional safety rules for drills Additional safety instructions for the charger Know your product Fitting and removing the battery pack Battery chargingTo obtain the best life for the battery Using the drillForward/reverse switch Adjustable torqueAdjustable side handle Inserting and removing bitsDrilling Chuck replacementMaintenance Page GMC customer assist

BN18SB specifications

Global Machinery Company BN18SB is a leading name in the heavy machinery sector, recognized for its commitment to innovation, efficiency, and performance. This robust machine is primarily designed for construction, mining, and industrial applications, reflecting Global Machinery's dedication to meeting the diverse needs of its clientele.

One of the standout features of the BN18SB is its exceptional power-to-weight ratio, which allows it to deliver outstanding performance while maintaining a manageable weight for ease of transport and operation. The machine is equipped with a high-performance engine that not only provides substantial horsepower but also emphasizes fuel efficiency. This aspect is crucial for contractors looking to manage operational costs without compromising on productivity.

The BN18SB incorporates advanced hydraulic systems, enhancing its lifting and digging capabilities. This technology ensures precise control, allowing operators to execute tasks with greater accuracy and speed. The hydraulic system is designed for robustness, minimizing downtime and maintenance requirements, which is a decisive factor for businesses aiming to maximize their operational uptime.

In addition to its power and efficiency, the Global Machinery BN18SB is built with operator comfort in mind. The spacious cabin is ergonomically designed, featuring intuitive controls that allow for seamless operation. Enhanced visibility from the cabin and sufficient noise reduction are also key characteristics, reducing operator fatigue during long work hours.

Safety is paramount in the design of the BN18SB. It is equipped with state-of-the-art safety features including an automatic shutdown system, rollover protection, and advanced stability management. These features not only protect the operator but also ensure compliance with international safety standards.

The machine's versatility is another significant advantage. It can be equipped with a variety of attachments, allowing it to perform multiple functions such as excavation, grading, and material handling. This adaptability makes it a valuable asset in any fleet, enhancing its utility across various types of projects.

In conclusion, the Global Machinery Company BN18SB stands out as a powerhouse in the heavy machinery industry, combining performance, efficiency, and safety. With its advanced technology, ergonomic design, and versatile capabilities, the BN18SB is an ideal choice for contractors and businesses seeking reliable and high-performing machinery for their projects. This machine not only represents the pinnacle of engineering excellence but also encapsulates Global Machinery's commitment to providing solutions that drive productivity and success in diverse industrial applications.