Safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Save these instructions 1. Work area

a. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool.

Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices

can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

BN18SB specifications

Global Machinery Company BN18SB is a leading name in the heavy machinery sector, recognized for its commitment to innovation, efficiency, and performance. This robust machine is primarily designed for construction, mining, and industrial applications, reflecting Global Machinery's dedication to meeting the diverse needs of its clientele.

One of the standout features of the BN18SB is its exceptional power-to-weight ratio, which allows it to deliver outstanding performance while maintaining a manageable weight for ease of transport and operation. The machine is equipped with a high-performance engine that not only provides substantial horsepower but also emphasizes fuel efficiency. This aspect is crucial for contractors looking to manage operational costs without compromising on productivity.

The BN18SB incorporates advanced hydraulic systems, enhancing its lifting and digging capabilities. This technology ensures precise control, allowing operators to execute tasks with greater accuracy and speed. The hydraulic system is designed for robustness, minimizing downtime and maintenance requirements, which is a decisive factor for businesses aiming to maximize their operational uptime.

In addition to its power and efficiency, the Global Machinery BN18SB is built with operator comfort in mind. The spacious cabin is ergonomically designed, featuring intuitive controls that allow for seamless operation. Enhanced visibility from the cabin and sufficient noise reduction are also key characteristics, reducing operator fatigue during long work hours.

Safety is paramount in the design of the BN18SB. It is equipped with state-of-the-art safety features including an automatic shutdown system, rollover protection, and advanced stability management. These features not only protect the operator but also ensure compliance with international safety standards.

The machine's versatility is another significant advantage. It can be equipped with a variety of attachments, allowing it to perform multiple functions such as excavation, grading, and material handling. This adaptability makes it a valuable asset in any fleet, enhancing its utility across various types of projects.

In conclusion, the Global Machinery Company BN18SB stands out as a powerhouse in the heavy machinery industry, combining performance, efficiency, and safety. With its advanced technology, ergonomic design, and versatile capabilities, the BN18SB is an ideal choice for contractors and businesses seeking reliable and high-performing machinery for their projects. This machine not only represents the pinnacle of engineering excellence but also encapsulates Global Machinery's commitment to providing solutions that drive productivity and success in diverse industrial applications.