Grizzly G3358 owner manual Lead Screw Info

Main Specifications:
Operation Info
Spindle Travel	5 in.
Swing	15-7/8 in.
Longitudinal Table Travel	23-1/2 in.
Cross Table Travel	7 in.
Ram Travel	12 in.
Head Travel	5 in.
Head Swivel	360 deg.
Turret Or Column Swivel	360 deg.
Max. Dist Spindle To Column	7 in.
Max. Dist Spindle To Table	17-3/4 in.
Drilling Cap For Cast Iron	1-1/4 in.
Drilling Cap For Steel	1-1/4 in.
No. Of Vert. Spindle Speeds	12
Range Of Vert. Spindle Speeds	120 - 2500 RPM
Quill Dia	2.950 in.
Table Info
Table Length	28-3/4 in.
Table Width	8-1/4 in.
Table Thickness	1-7/8 in.
No. Of T Slots	4
T Slots Width	0.550 in.
T Slots Height	0.850 in.
T Slots Centers	1-3/4 in.
Stud Size	3/8 in.
Spindle Info
Spindle Taper	R-8
Spindle Sleeve Diameter	3 in.
End Milling Cap	3/4 in.
Face Milling Cap	3 in.
Draw Bar Diameter	7/16 in.
Draw Bar TPI	20
Draw Bar Length	15-5/8 in.
Spindle Bearings	Tapered Roller
Lead Screw Info
Lead Screw Diameter	15/16 in.
Lead Screw TPI	10
Lead Screw Length	32 in.
Construction
Spindle Housing Const	Cast Iron
Table Const	Surface Ground Cast Iron
Head Const	Cast Iron
Column Const	Cast Iron
Base Const	Cast Iron
Paint	Epoxy
Other
Collars Calibrated	0.001 in.
Column Dia	4-1/2 in.
Optional Stand	G5944
Mobile Base	G7314

Model G3358	The information contained herein is deemed accurate as of 5/27/2008 and represents our most recent product specifications.	PAGE 2 OF 3
	Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
G3358 Milling/Drilling Machine		-5-