Grizzly instruction manual TableHANDLES, Handles installed G1199/G1200 Drill Press

Page 11

TableHANDLES

1.Place the table into the hole in the table brack- et and secure with the handle. Figure 6.

Figure 6. Installing the table.

2.Turn the crank handle to be sure the worm pinion engages the teeth on the rack and moves the bracket up and down. Figure 7. CAUTION: Never use the drill press with either table lock loose.

Figure 7.

Screw the three handle bars into the tapped holes in the handle body. Figure 8.

Figure 8. Handles installed.

 

 

 

 

 

 

 

 

 

 

 

 

G1199/G1200 Drill Press

-9-

Image 11
Contents Model G1199/G1200 Drill PressG1199/G1200 Drill Press Table Of Contents Introduction Safety Rules For All Tools Overview of all the parts G1199/G1200 Drill Press Unpacking Piece InventoryClean up Site Considerations Circuit Requirements Beginning Assembly Base/Column AssemblyPage TableHANDLES Handles installed G1199/G1200 Drill PressDrill Chuck Speed Change AdjustmentsTable Adjustments Removing the chuck G1199/G1200 Drill Press Chuck RemovalOperations Safety RulesTest Run Drill Changes Drill Speed Drilling Metal Drilling Wood Mortise Attachment Mortise Attachment installed G1199/G1200 Drill PressBelt Tension MaintenanceGeneralLubrication Closure 32A 32B 100 Base PN02M Machine Data Troubleshooting Warranty and Returns Recommended RPM B a G1199/G1200 Drill Press