Ring Guard |
| Keyed Washers |
|
|
|
|
|
|
The Ring Guard (REF 19) is an important safety feature and should always be used when shap- ing. Before the Mini Shaper is turned on, the ring guard should be positioned approximately 1⁄4'' above the workpiece and locked in place.
When making adjustments or setting the cutter, the Ring Guard can be loosened and rotated out of the way.
Figure 12.
The keyed Washer must be directly under the JAM NUT; otherwise, the nut may loosen and serious injury may result. Always lock the spindle knob after adjusting it. See Figure 13.
Jam Nut
Keyed Washer
Figure 13.
|
|
|
|
|
|
|
|
|
|
|
|
G8693 Mini Shaper | |||