Dust Collection
Your Mini Shaper has a rear chip discharge which fits any standard dust collection with a 21⁄2'' hose. A 21⁄2'' to 11⁄4'' hose adapter is supplied with the Mini Shaper. Attaching a dust collection system will keep your work area cleaner.
If Chip Discharge clogs with chips, turn switch OFF and UNPLUG unit to avoid accidental start- ing. Dislodge chips and debris with a pencil or wood dowel, minimum 6 inches in length.
Do not use finger since stationary blades are | Figure 19. | ||
|
|
| |
sharp. |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
When resuming operation, feed at a slower rate to avoid
Never leave hose connected to the machine dur- ing operation if a vac is not turned on. The hose and machine will clog with chips.
G8693 Mini Shaper |